Most common failures | No# failures |
---|
Headlamp aim out of alignment | 6 |
Parking brake: efficiency below requirements |3.7.B.7| | 5 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 3 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Horn not working |1.6.2a| | 2 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
Direction indicators not working |1.4.A.2c| | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Rear brake binding | 2 |
Rear parking brake recording little or no effort | 2 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Fuel system component leaking |7.2.3| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Brake pedal anti-slip provision incomplete |3.3.A.1b| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Registration plate issues | 1 |
Front passenger seat insecure |6.2.3| | 1 |
Nearside Front Direction indicators not working |1.4.A.2c| | 1 |
Offside Rear Direction indicators not working |1.4.A.2c| | 1 |
All position lamps not working |1.1.A.3b| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
Brakes imbalanced across an axle | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Shock absorber has negligible damping effect |2.7.5| | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Front Windscreen washer control missing |8.2.1a| | 1 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Nearside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Registration plate lamp issues | 1 |
Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Nearside Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Offside Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Driver`s seat insecure |6.2.A.1| | 1 |
Offside Front Axle beam cracked |2.5.A.5a| | 1 |
Nearside Front Shock absorber has an excessively worn bush |2.7.4| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Exhaust emits clearly visible black smoke during acceleration |7.4.A2| | 1 |