Most common failures | No# failures |
---|
Parking brake: efficiency below requirements |3.7.B.7| | 4 |
Brakes imbalanced across an axle | 3 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Headlamp not working on main beam |1.7.5a| | 2 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Registration plate lamp issues | 2 |
Registration plate issues | 1 |
Offside Rear Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 1 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Front Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Direction indicators not working |1.4.A.2c| | 1 |
Windscreen wiper does not clear the windscreen effectively | 1 |
Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Intermediate drop arm insecure |2.2.B.1a| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Horn not working |1.6.2a| | 1 |
Direction indicators not working |1.4.A.2c| | 1 |
Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Service brake is causing the vehicle to swerve to the nearside |3.7.C.2| | 1 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Speedometer not fitted |6.7.1| | 1 |
Direction indicators not working all |1.4.A.2c| | 1 |
Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |