Most common failures | No# failures |
---|
Headlamp aim out of alignment | 9 |
Registration plate lamp issues | 3 |
Windscreen wiper does not clear the windscreen effectively | 3 |
Parking brake lever has excessive movement indicating incorrect adjustment |1.1.6 |c|| | 2 |
Brakes imbalanced across an axle | 2 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Brake hose excessively deteriorated | 2 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Parking brake: efficiency below requirements |3.7.C.1b| | 2 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 2 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 2 |
Offside Headlamp not working on main beam |1.7.5a| | 2 |
Offside Rear Direction indicator not working |1.4.A.2c| | 2 |
Offside Rear Battery insecure |1.9.1| | 1 |
rear parking |secondary| brakes imbalanced | 1 |
Rear brake application uneven | 1 |
Front Suspension component mounting prescribed area is excessively corroded nearside and offside axle |2.4.A.3| | 1 |
Windscreen washer not working | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Offside Rear Battery insecure and likely to cause a short circuit |4.13 |a| |ii|| | 1 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
Rear Parking |secondary brake| on a single line braking system has inadequate effort at a wheel |1.3.1 |a| |i|| | 1 |
Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Front Track rod end ball pin shank loose |2.2.B.1c| | 1 |
Nearside Outer Rear Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Front Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Brake pipe leaking |3.6.A.1| | 1 |
Front passenger seat insecure |6.2.3| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
Offside Rear Electrical wiring inadequately supported Kill switch |1.9.2a| | 1 |
Nearside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
Rear parking brake recording little or no effort | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Axle beam inappropriately repaired |2.4.A.2| | 1 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
Offside Rear Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near jacking point |6.1.B.2| | 1 |
Nearside Front Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 1 |
Nearside Rear Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 1 |
Offside Rear Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 1 |
Offside Front Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside Front Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
Registration plate issues | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded axle tube also poor repair |2.4.A.3| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Offside Rear Drive shaft which forms part of the suspension coupling gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |