Most common failures | No# failures |
---|
Headlamp aim out of alignment | 18 |
Windscreen wiper does not clear the windscreen effectively | 10 |
Rear parking brake recording little or no effort | 8 |
Parking brake: efficiency below requirements |3.7.B.7| | 8 |
Horn not working |1.6.2a| | 7 |
Brakes imbalanced across an axle | 5 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 4 |
Offside Stop lamp not working |1.2.1b| | 3 |
Registration plate issues | 3 |
Service brake: efficiency below requirements |3.7.B.7| | 3 |
Brake hose excessively deteriorated | 3 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 3 |
Front brake application uneven | 3 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
Registration plate lamp issues | 2 |
Offside Rear Direction indicator not working |1.4.A.2c| | 2 |
Parking brake lever has no reserve travel |3.1.6b| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Offside Rear Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 2 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 2 |
Indicator tell tale inoperative |1.4.A.2a| | 2 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
Offside Front Sub-frame corroded and seriously weakened |2.4.G.1| | 2 |
Parking brake: efficiency below requirements |3.7.C.1b| | 2 |
Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 1 |
Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
Nearside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Front Steering rack cracked and unserviceable |2.2.C.1d| | 1 |
Nearside Front Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Front Shock absorber has an excessively worn bush |2.7.4| | 1 |
Braking system leaking |3.6.A.1| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Nearside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Rear brake binding | 1 |
Horn is a gong |1.6.2c| | 1 |
Nearside Rear position lamp|s| insecure |1.1.A.3a| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Indicator tell tale inoperative |1.4.A.2a| | 1 |
Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Offside Rear Brake lining|s| less than 1.5 mm thick |3.5.1g| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Windscreen wiper not working (3.4 (a)) | 1 |
Offside Windscreen wiper not working (3.4 (a)) | 1 |
Windscreen washer not working | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
Nearside front brake juddering severely |3.7.A.2b| | 1 |
Offside front brake juddering severely |3.7.A.2b| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Front Headlamp not working on main beam |1.7.5a| | 1 |
Headlamp not working on main beam |1.7.5a| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Front Steering component mounting prescribed area is inadequately repaired |2.2.C.1h| | 1 |
Offside Front Shock absorber insecure |2.7.2b| | 1 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Rear Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Offside Rear Battery insecure |1.9.1| | 1 |
Nearside Rear Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Offside Front Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Nearside Windscreen wiper blade missing |8.2.2| | 1 |
Nearside Front Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Indicator switch insecure |1.4.A.1| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
Steering locking device missing |2.2.C.1g| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Rear brake application uneven | 1 |
Offside Headlamp aim headlamp not in good working order adversely affecting beam image |1.2.4b| | 1 |
Rear Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
Steering pivot point has excessive play |2.2.B.1g| | 1 |
Offside Rear Drive shaft uj which forms part of the suspension has a loose flange bolt |2.4.G.4c| | 1 |
Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Rear Fluid suspension has no suspension movement |2.4.D.5| | 1 |
Offside Rear Fluid suspension has no suspension movement |2.4.D.5| | 1 |
Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 1 |
Exhaust engine idle speed too high |7.3.A.2a| | 1 |
Ball joint has excessive play |2.2.B.1f| | 1 |
Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Inner Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Centre Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
Suspension component mounting prescribed area is excessively corroded Offside front shock top mount also damaged |2.4.A.3| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Steering column flexible coupling fractured and unserviceable |2.2.C.1d| | 1 |
Centre Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
passenger door does not latch securely closed Boot |6.2.B.1a| | 1 |
Steering component mounting prescribed area is excessively corroded Front cross member corroded close to steering box |2.2.C.1h| | 1 |
Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt Ball joint steering box end |2.2.C.1c| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded In wheel arch upper |5.2.6| | 1 |
Nearside Rear Brake back plate|s| securing device excessively deteriorated |3.5.1j| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Nearside Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded MARKED |5.2.6| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded inner front chassis rail |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail area MARKED |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength top bump stop area MARKED |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded top bump stop area MARKED |2.4.A.3| | 1 |
Nearside Rear Drive shaft which forms part of the suspension coupling gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |