Most common failures | No# failures |
---|
Registration plate lamp issues | 6 |
Horn not working |1.6.2a| | 5 |
Rear parking brake recording little or no effort | 4 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 3 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Parking brake: efficiency below requirements |3.7.B.7| | 3 |
Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 2 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Nearside Headlamp not working on main beam |1.7.5a| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Brakes imbalanced across an axle | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear brake binding | 2 |
Offside Front Lower Shock absorber has an excessively worn bush |2.7.4| | 2 |
Headlamp aim out of alignment | 2 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Battery insecure |1.9.1| | 1 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Headlamp aim so that beam "kick up" is not visible on the screen |1.8.B.1| | 1 |
Steering arm has relative movement at its fixings Drop arm securing nut loose |2.2.B.1h| | 1 |
Nearside Rear Outer Drive shaft which forms part of the suspension coupling gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
Steering column top mounting bracket insecure |2.1.2d| | 1 |
Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Upper Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Direction indicators not working |1.4.A.2c| | 1 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
Offside Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Semaphore indicator tell tale not working correctly |1.4.C.2| | 1 |
Offside Semaphore indicator tell tale not working correctly |1.4.C.2| | 1 |
Offside Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
Nearside Front Direction indicators incorrect colour |1.4.A.2f| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Offside Service brake excessively fluctuating |1.2.1 |e|| | 1 |
Nearside Front Lower Front suspension locking device ineffective |2.5.A.4| | 1 |
Offside Front Lower Front suspension locking device ineffective |2.5.A.4| | 1 |
Offside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Nearside Battery insecure |1.9.1| | 1 |
Offside Battery insecure |1.9.1| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Speedometer cannot be illuminated. |6.7.3| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Rear Stop lamp emits other than a steady red light |1.2.1e| | 1 |
Nearside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Registration plate issues | 1 |
Offside Front Steering component mounting prescribed area is excessively corroded Steering box |2.2.C.1h| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Centre Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Front Passenger`s seat insecure |6.2.A.1| | 1 |
Nearside Front coil spring incomplete |2.4.C.1a| | 1 |
Nearside Front Coil spring not correctly located |2.4.C.2| | 1 |
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |