Most common failures | No# failures |
---|
Brake pipe excessively corroded | 7 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Headlamp aim out of alignment | 5 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Rear parking brake recording little or no effort | 3 |
Rear brake application uneven | 3 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Brake hose excessively deteriorated | 2 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
Nearside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Nearside Front Torsion bar deteriorated by corrosion so that its cross sectional area is reduced and seriously weakened |2.4.E.1b| | 1 |
Offside Front Torsion bar deteriorated by corrosion so that its cross sectional area is reduced and seriously weakened |2.4.E.1b| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Service brake is causing the steering wheel to severely pull one way |3.7.C.2| | 1 |
Front brake application uneven | 1 |
Registration plate lamp issues | 1 |
Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Nearside Front Brake hose twisted |3.6.B.4c| | 1 |
Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Upper Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Steering component mounting prescribed area is excessively corroded front panel 30cm from steering box |2.2.C.1h| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Rear brake binding | 1 |
Suspension has inadequate clearance with the bump stop rear suspension |2.4.A.1a| | 1 |
Suspension has inadequate clearance with the bump stop front bump stops removed , allowing steering arms to foul on chassis |2.4.A.1a| | 1 |
Nearside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Offside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Brakes imbalanced across an axle | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Offside Rear Brake back plate|s| securing device excessively deteriorated |3.5.1j| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |