Most common failures | No# failures |
---|
Headlamp aim out of alignment | 7 |
Horn not working |1.6.2a| | 6 |
Brake pipe excessively corroded | 5 |
Windscreen wiper does not clear the windscreen effectively | 4 |
Registration plate lamp issues | 3 |
Rear brake binding | 3 |
Offside Front position lamp|s| not working |1.1.A.3b| | 3 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 3 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 3 |
Brake hose excessively deteriorated | 3 |
Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Nearside Front Direction indicator not working |1.4.A.2c| | 2 |
Nearside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
Registration plate issues | 2 |
Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 2 |
Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear brake application uneven | 2 |
Offside Headlamp insecure |1.7.3| | 2 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Nearside Headlamp not working on main beam |1.7.5a| | 2 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
Nearside Front passenger seat insecure |6.2.3| | 2 |
Nearside Rear Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 2 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Windscreen wiper blade insecure | 2 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Offside Front Direction indicator not working |1.4.A.2c| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Offside Rear Sub-frame attachment bracket/mounting insecure |2.4.G.1| | 1 |
Nearside Front Upper Trailing arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Front Fuel hose insecure |7.2.1| | 1 |
Headlamp switch faulty |1.7.1| | 1 |
Nearside Rear Direction indicators not working |1.4.A.2c| | 1 |
Offside Rear Direction indicators not working |1.4.A.2c| | 1 |
Steering box insecure |2.2.B.1a| | 1 |
Speedometer clearly inoperative |6.7.2| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Nearside Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Offside Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Front Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Statutory seat belt of the wrong type. |5.1.1| | 1 |
Front Torsion bar adjustment assembly inadequately locked |2.4.E.3| | 1 |
Parking brake lever ratchet mechanism is broken |3.1.5| | 1 |
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
Offside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
Offside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Horn emits two or more alternating tones |1.6.2d| | 1 |
Nearside Front Lower Suspension arm insecure |2.4.G.1| | 1 |
Offside Front Lower Suspension arm insecure |2.4.G.1| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Front wheel bearing has excessive play both |2.5.A.3c| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Rear parking brake recording little or no effort | 1 |
Offside Inner Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Steering locking device missing |2.2.C.1g| | 1 |
Nearside Steering locking device missing |2.2.C.1g| | 1 |
Offside Front Steering locking device missing |2.2.C.1g| | 1 |
Nearside Inner Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Inner Rear Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Inner Rear Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch area |6.1.B.2| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Direction indicators not working |1.4.A.2c| | 1 |
Indicator switch faulty |1.4.A.1| | 1 |
Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Offside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 1 |
Nearside Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Brakes imbalanced across an axle | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 1 |
Nearside Front Shock absorber - all missing when fitted as standard |2.7.1a| | 1 |
Offside Front Shock absorber - all missing when fitted as standard |2.7.1a| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings oute rsill |6.1.B.2| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Headlamp aim not tested |1.8.A.1c| | 1 |
Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
Brake hose has insufficient room to move | 1 |
Offside Rear Anti-roll bar attachment bracket/mounting cracked |2.4.G.1| | 1 |
Front brake application uneven | 1 |
Offside Rear Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Offside Rear Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front Passenger`s seat insecure |6.2.A.1| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Offside Outer Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Outer Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Wheel bolt|s| missing |4.2.A.1e| | 1 |
Offside Rear Wheel bolt|s| missing |4.2.A.1e| | 1 |
Nearside Rear Wheel bolt|s| missing |4.2.A.1e| | 1 |
Offside Front Wheel bolt|s| missing |4.2.A.1e| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Offside Front Obligatory mirror does not provide a view to the rear |8.1.2b| | 1 |
Offside Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Driver`s seat insecure |6.2.A.1| | 1 |
Offside Front Seat belt retracting mechanism defective |5.2.5b| | 1 |
Nearside Front Seat belt retracting mechanism defective |5.2.5b| | 1 |
Nearside Front Lower Trailing arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |