| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 8 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 3 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
| Registration plate lamp issues | 2 |
| Offside Headlamp not working on main beam |1.7.5a| | 2 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
| Offside Rear fog lamp not working |1.3.2b| | 2 |
| Brake hose excessively deteriorated | 2 |
| Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Nearside Front Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Side repeater missing |1.4.A.2b| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Upper Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Brake hose damaged | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Driver`s seat insecure |6.2.A.1| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 1 |
| Rear Wheel bearing has excessive play both (5.1.3 (a) (i)) | 1 |
| Nearside Headlamp not working on main beam |1.7.5a| | 1 |
| Headlamp aim not tested |1.8.A.1c| | 1 |
| Nearside Side repeater not working |1.4.A.2c| | 1 |
| Offside Side repeater not working |1.4.A.2c| | 1 |
| Centre Rear passenger seat cannot be secured in the upright position. |6.2.3| | 1 |
| Rear fog lamp switch missing |1.3.1a| | 1 |
| Offside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Nearside Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Rear brake application uneven | 1 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect Unable to determine headlamp type (no markings)- aftermarket LED units fitted (4.1.2 (c)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect Unable to determine headlamp type (no markings)- aftermarket LED units fitted (4.1.2 (c)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Offside Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Registration plate issues | 1 |
| Emissions not tested (8.2.1.2 (d)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sil (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i)) | 1 |
| Nearside Front Brake hose excessively damaged (1.1.12 (b) (ii)) | 1 |
| Fuel tank leaking (6.1.3 (b) (i)) | 1 |