Most common failures | No# failures |
---|
Horn not working |1.6.2a| | 4 |
Service brake: efficiency below requirements |3.7.B.7| | 4 |
Headlamp aim out of alignment | 3 |
Nearside Headlamp not working on main beam |1.7.5a| | 3 |
Steering column top bearing excessively worn |2.1.2c| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Registration plate lamp issues | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Nearside Front Axle beam cracked |2.5.A.5a| | 1 |
Offside Front Axle beam cracked |2.5.A.5a| | 1 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Steering box has relative movement between sector shaft and the drop arm |2.2.B.1b| | 1 |
Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Front Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 1 |
Offside Front Direction indicators not working |1.4.A.2c| | 1 |
rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
Front passenger seat cannot be secured in the upright position. |6.2.4| | 1 |
Rear passenger seat cannot be secured in the upright position. |6.2.3| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Vehicle structure has an inadequate repair which adversely affects braking or steering |6.1.A.1| | 1 |
Registration plate issues | 1 |
Offside Windscreen wiper blade missing |8.2.2| | 1 |
All position lamps not working |1.1.A.3b| | 1 |
Headlamp not working on dipped beam Both |1.7.5a| | 1 |
Stop lamp not working Both |1.2.1b| | 1 |
Direction indicator not working All |1.4.A.2c| | 1 |
Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner arch |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner arch |6.1.B.2| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Fuel pipe excessively damaged |7.2.2| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps |1.7.4b| | 1 |
Nearside Front front brake recording little or no effort |3.7.B.5a| | 1 |
Offside Front front brake recording little or no effort |3.7.B.5a| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |