| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 6 |
| Horn not working |1.6.2a| | 3 |
| Windscreen wiper does not clear the windscreen effectively | 3 |
| Parking brake: efficiency below requirements |3.7.B.7| | 2 |
| Service brake: efficiency below requirements |3.7.B.7| | 2 |
| Offside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Brakes imbalanced across an axle | 2 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Rear Stop lamp not working |1.2.1b| | 2 |
| Offside Rear Stop lamp not working |1.2.1b| | 2 |
| Rear Stop lamp not working |1.2.1b| | 1 |
| Direction indicators not working |1.4.A.2c| | 1 |
| Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Nearside Front Wheel nut|s| missing |4.2.A.1e| | 1 |
| Offside Front Wheel nut|s| missing |4.2.A.1e| | 1 |
| Front Statutory seat belt missing |5.1.1| | 1 |
| Front passenger seat insecure |6.2.3| | 1 |
| Nearside Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
| Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Headlamp aim not tested |1.8.A.1c| | 1 |
| Offside Headlamp aim not tested |1.8.A.1c| | 1 |
| Brake performance not tested |3.7.A.1| | 1 |
| Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Braking system leaking master cylinder pipes |3.6.A.1| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded subframe-chassis/body mountings |2.4.A.3| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded subframe-chassis/body mountings |2.4.A.3| | 1 |
| Nearside Front Outer Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Outer Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside All position lamps not working |1.1.A.3b| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Registration plate lamp issues | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Headlamp not working on main beam |1.7.5a| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Fuel cap/sealing device sealing washer torn |7.2.4c| | 1 |
| Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Rear Seat belt retracting mechanism defective ratchet mechanism does not lock |5.2.5b| | 1 |
| Windscreen wiper not working both |3.4 |a|| | 1 |
| Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Emissions not tested |7.0| | 1 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |