Most common failures | No# failures |
---|
Headlamp aim out of alignment | 14 |
Windscreen wiper does not clear the windscreen effectively | 3 |
Offside Headlamp not working on main beam |1.7.5a| | 2 |
Brakes imbalanced across an axle | 2 |
Rear Mechanical brake component has restricted free movement | 2 |
Brake pipe excessively corroded | 2 |
Rear parking brake recording little or no effort | 2 |
Rear brake application uneven | 2 |
Registration plate lamp issues | 2 |
Nearside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 2 |
Direction indicators not working |1.4.A.2c| | 2 |
Brake hose excessively deteriorated | 2 |
Battery insecure |1.9.1| | 2 |
Centre Obligatory mirror missing |8.1.1| | 2 |
Position lamp switch does not illuminate the front and rear position lamps with a single operation |1.1.A.2| | 1 |
Nearside Brake pipe stretched |found during steering lock to lock check| |2.2.D.2b| | 1 |
Offside Brake pipe stretched |found during steering lock to lock check| |2.2.D.2b| | 1 |
Offside Inner Front Steering locking device missing |2.2.C.1g| | 1 |
Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 1 |
Nearside Rear reflector missing |1.5.1a| | 1 |
Offside Rear reflector missing |1.5.1a| | 1 |
Offside Obligatory mirror missing |8.1.1| | 1 |
Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3| | 1 |
Speedometer cannot be illuminated. |6.7.3| | 1 |
Mechanical brake component has restricted free movement | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Nearside Rear front brake binding |3.7.B.1| | 1 |
Front brake application uneven | 1 |
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Parking (secondary brake) on a single line braking system imbalanced across an axle Axle 1 (1.3.1 (b) (i)) | 1 |
Parking brake lever ratchet not holding correctly Failed on brake test (1.1.6 (a)) | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Brake hose damaged | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Service brake is causing the vehicle to swerve to the nearside |3.7.C.2| | 1 |
Parking brake lever ratchet mechanism is broken |3.1.5| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Bootlid cannot be secured in the closed position |6.4.1| | 1 |
Nearside Front Wheel nut|s| missing |4.2.A.1e| | 1 |
Nearside Front Upper Seat belt insecurely fixed to the vehicles structure mountings bolted through fibreglass body |5.2.1a| | 1 |
Headlamp not working on dipped beam Both sides (4.1.1 (a) (ii)) | 1 |
Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Front Statutory seat belt missing |5.1.1| | 1 |
Brake pedal inappropriately repaired |3.3.A.6| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Headlamp not working on main beam |1.7.5a| | 1 |
Horn not working |1.6.2a| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Offside Front Upper Seat belt insecurely fixed to the vehicles structure Passenger seatbelt mount bolted through fibreglass bodywork |5.2.1a| | 1 |
Nearside Front Seat belt retracting mechanism defective |5.2.5b| | 1 |
Rear Outer Seat belt insecurely fixed to the vehicles structure rear o/s and n/s seat belts mounts are bolted though fibreglass lower and upper mounts. |5.2.1a| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Speedometer not fitted |6.7.1| | 1 |
Nearside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Service brake is causing the steering wheel to severely pull one way |3.7.C.2| | 1 |
Nearside Front Torsion bar excessive play at an end fixing |2.4.E.2| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Offside Front Lower Brake master cylinder/servo mounting prescribed area is excessively corroded (1.1.21 (e) (i)) | 1 |
Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Indicator switch faulty |1.4.A.1| | 1 |
Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Battery tray is inadequately welded |6.1.B.2| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Obligatory mirror missing |8.1.1| | 1 |
Electrical wiring insecure |1.9.2a| | 1 |
Registration plate issues | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Nearside Rear Brake back plate|s| securing device loose |3.5.1j| | 1 |
Offside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |