Most common failures | No# failures |
---|
Headlamp aim out of alignment | 7 |
Windscreen wiper does not clear the windscreen effectively | 4 |
Service brake: efficiency below requirements |3.7.B.7| | 4 |
Horn not working |1.6.2a| | 3 |
Offside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 2 |
Brake hose excessively deteriorated | 2 |
Mechanical brake component has restricted free movement | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Stop lamp not working |1.2.1b| | 2 |
Nearside front brake recording little or no effort |3.7.B.5a| | 2 |
Offside front brake recording little or no effort |3.7.B.5a| | 2 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
Offside rear brake recording little or no effort |3.7.B.5a| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Registration plate lamp issues | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced round jacking plates and box sections and arches (6.1.1 (c) (i)) | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced around arches (6.1.1 (c) (i)) | 1 |
Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Offside Front Seat belt installation anchorage insecure (10.1 (d)) | 1 |
Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
Central Front Steering linkage ball joint has excessive play nearside inner (2.1.3 (b) (i)) | 1 |
Nearside Front Brake pipe connection leaking on a hydraulic braking system at caliper and flexi (1.1.11 (b) (ii)) | 1 |
Central Front Brake pipe connection leaking on a hydraulic braking system joint to both brakes (1.1.11 (b) (ii)) | 1 |
Central Rear Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Offside Front Service brake excessively binding |1.2.1 |f|| | 1 |
Nearside Front Seat belt anchorage likely to become detached in the event of a collision bolt missing |7.1.1 |a| |ii|| | 1 |
Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
Steering locking device missing |2.2.C.1g| | 1 |
Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Braking system leaking |3.6.A.1| | 1 |
Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Windscreen has damage | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Offside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Brake pipe inadequately supported |3.6.B.1| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Front Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
Front Headlamp adversely affected by the operation of another lamp |1.7.5c| | 1 |
Offside Rear Braking system leaking |3.6.A.1| | 1 |
Brake lever locking device missing |3.5.1l| | 1 |
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired front crossmember (6.2.2 (d) (ii)) | 1 |
Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Emissions not tested |7.0| | 1 |
Central Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front cross member (6.1.1 (c) (i)) | 1 |
Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Indicator switch faulty |1.4.A.1| | 1 |
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Rear Braking system leaking |3.6.A.1| | 1 |
Nearside Front Brake pipe inadequately supported |3.6.B.1| | 1 |
Offside Front Brake pipe inadequately supported |3.6.B.1| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Brake pipe excessively corroded | 1 |
Offside Rear Brake back plate|s| securing device excessively deteriorated |3.5.1j| | 1 |
Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Front Lower Shock absorber has an excessively worn bush |2.7.4| | 1 |