Most common failures | No# failures |
---|
Headlamp aim out of alignment | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Horn not working |1.7.3a| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Nearside Front Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Centre Front Front position lamp missing |1.1.1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Front Lower Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear reflector on motorcycle missing (1.4.1) | 1 |
Drive chain excessively loose (6.2.1d) | 1 |
Registration plate issues | 1 |