MOT History from tests of petrol VESPA T5s year 1986

Review the list of common VESPA T5 failures below or to perform a specific mot history check on your VESPA then use our popular KnowYourCar service

mot history

Pass percent:82.24%

(The average a petrol VESPA T5 year 1986 passes without issue)

Based on:107 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	2
Offside Rear Direction indicator not working \|1.5.1c\|	2
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	2
Rear wheel has a missing wheel nut\|s\| \|4.2.3a\|	1
Front Brake lever is damaged and the brake cannot be readily applied \|3.1.3c\|	1
Offside Rear Direction indicators not working \|1.5.1c\|	1
Front Brake cable insecure (1.1.15 (c))	1
Exhaust system insecure (6.1.2 (a))	1
Headlamp not working on main beam (4.1.1 (a) (ii))	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Front Headlamp aim beam image kick-up is to the offside \|1.6.1\|	1
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Front Position lamp not working (4.2.1 (a))	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Nearside Front Direction indicators not working \|1.5.1c\|	1
Horn not working \|1.7.3a\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Front Handlebar mounting clamp bolt loose \|2.1.1a\|	1
Rear Brake cable insecure	1
Rear Wheel fixing loose (multiple fixings) (5.2.1 (a) (i))	1
Registration plate issues	1
Nearside Front Direction indicator not working (4.4.1 (a) (ii))	1
Offside Front Direction indicator not working (4.4.1 (a) (ii))	1
Offside Rear Direction indicator not working (4.4.1 (a) (ii))	1
Exhaust mounting missing \|7.1.1c\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Front Brake lever has inadequate reserve travel \|3.1.3b\|	1
Rear Shock absorber has negligible damping effect \|5.3.2 \|b\|\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	2
Offside Rear Direction indicator not working \|1.5.1c\|	2
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	2
Rear wheel has a missing wheel nut\|s\| \|4.2.3a\|	1
Front Brake lever is damaged and the brake cannot be readily applied \|3.1.3c\|	1
Offside Rear Direction indicators not working \|1.5.1c\|	1
Front Brake cable insecure (1.1.15 (c))	1
Exhaust system insecure (6.1.2 (a))	1
Headlamp not working on main beam (4.1.1 (a) (ii))	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Front Headlamp aim beam image kick-up is to the offside \|1.6.1\|	1
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Front Position lamp not working (4.2.1 (a))	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Nearside Front Direction indicators not working \|1.5.1c\|	1
Horn not working \|1.7.3a\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Front Handlebar mounting clamp bolt loose \|2.1.1a\|	1
Rear Brake cable insecure	1
Rear Wheel fixing loose (multiple fixings) (5.2.1 (a) (i))	1
Registration plate issues	1
Nearside Front Direction indicator not working (4.4.1 (a) (ii))	1
Offside Front Direction indicator not working (4.4.1 (a) (ii))	1
Offside Rear Direction indicator not working (4.4.1 (a) (ii))	1
Exhaust mounting missing \|7.1.1c\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Front Brake lever has inadequate reserve travel \|3.1.3b\|	1
Rear Shock absorber has negligible damping effect \|5.3.2 \|b\|\|	1

MOT History from tests of petrol VESPA T5s year 1986

Find us on Facebook