Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Registration plate issues | 6 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Headlamp aim not tested (4.1.2 (b)) | 3 |
Nearside Rear Direction indicators not working |1.5.1c| | 3 |
Indicator tell tale not functioning |1.5.2| | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Nearside Steering lock stop missing |2.1.3| | 1 |
Rear Brake pedal attachment screws missing. |3.1.2b| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Suspension component pin or bush excessively worn engine mount/bush |5.3.4 |a| |i|| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Upper Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. shock absorber mount |2.4.A.2d| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Centre Built up wheel has a loose bolt/s |4.2.1c| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Brake component has an inadequate repair |3.1.5| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Fuel cap leaking (6.1.3 (b) (i)) | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Upper Exhaust mounting missing |7.1.1c| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Indicator tell tale not functioning |1.5.2| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |