MOT History from tests of petrol VESPA (DOUGLAS) PX125s year 1991

Review the list of common VESPA (DOUGLAS) PX125 failures below or to perform a specific mot history check on your VESPA (DOUGLAS) then use our popular KnowYourCar service

mot history

Pass percent:73.33%

(The average a petrol VESPA (DOUGLAS) PX125 year 1991 passes without issue)

Based on:120 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	6
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	5
Registration plate issues	5
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	4
Front Brake lever has inadequate reserve travel \|3.1.3b\|	4
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	3
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	2
Nearside Rear Direction indicators not working \|1.5.1c\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2
Nearside Rear Direction indicator not working \|1.5.1c\|	2
Offside Rear Direction indicator not working \|1.5.1c\|	2
Headlamp insecure \|1.2.3b\|	1
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	1
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	1
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Front wheel bearings have excessive free play \|2.3.5b\|	1
Offside Indicator tell tale not functioning \|1.5.2\|	1
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Offside Front Direction indicator not working (4.4.1 (a) (ii))	1
Riders seat insecure (6.2.5 (a) (ii))	1
Stop lamp remains on when the brake is released \|1.3.1e\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Fuel cap mounting flange/sealing method defective \|7.2.2c\|	1
Nearside Indicator tell tale not functioning \|1.5.2\|	1
Pillion seat insecure \|6.2.6 \|a\| \|ii\|\|	1
Front Brake lever mounting insecure \|3.1.2a\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Offside Rear Direction indicator not working (4.4.1 (a) (ii))	1
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Direction indicator not working \|1.5.1c\|	1
Throttle operating incorrectly \|6.2.1f\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	6
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	5
Registration plate issues	5
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	4
Front Brake lever has inadequate reserve travel \|3.1.3b\|	4
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	3
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	2
Nearside Rear Direction indicators not working \|1.5.1c\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2
Nearside Rear Direction indicator not working \|1.5.1c\|	2
Offside Rear Direction indicator not working \|1.5.1c\|	2
Headlamp insecure \|1.2.3b\|	1
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	1
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	1
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Front wheel bearings have excessive free play \|2.3.5b\|	1
Offside Indicator tell tale not functioning \|1.5.2\|	1
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Offside Front Direction indicator not working (4.4.1 (a) (ii))	1
Riders seat insecure (6.2.5 (a) (ii))	1
Stop lamp remains on when the brake is released \|1.3.1e\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Fuel cap mounting flange/sealing method defective \|7.2.2c\|	1
Nearside Indicator tell tale not functioning \|1.5.2\|	1
Pillion seat insecure \|6.2.6 \|a\| \|ii\|\|	1
Front Brake lever mounting insecure \|3.1.2a\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Offside Rear Direction indicator not working (4.4.1 (a) (ii))	1
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Direction indicator not working \|1.5.1c\|	1
Throttle operating incorrectly \|6.2.1f\|	1

MOT History from tests of petrol VESPA (DOUGLAS) PX125s year 1991

Find us on Facebook