Most common failures | No# failures |
---|
Headlamp aim out of alignment | 6 |
Indicator tell tale not functioning |1.5.2| | 4 |
Registration plate issues | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Horn not working |1.7.3a| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Front Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Rear Brake cable badly frayed |3.2.A1b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Registration plate lamp issues | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
An item not tested |Manual| | 1 |
Offside Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |