Most common failures | No# failures |
---|
Brake load sensing valve linkage seized |3.6.E.3| | 3 |
Registration plate lamp issues | 3 |
Service brake: efficiency below requirements |3.7.B.7| | 3 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Nearside Steering rack gaiter split |2.2.D.2d| | 2 |
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 2 |
Rear brake binding | 2 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear brake application uneven | 2 |
Brake load sensing valve linkage defective and function impaired |3.6.E.3| | 2 |
Nearside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 2 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
Offside rear brake recording little or no effort |3.7.B.5a| | 2 |
Brake pipe excessively corroded | 2 |
Headlamp aim out of alignment | 2 |
Nearside Front Shock absorber has an excessively worn bush |2.7.4| | 2 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Brakes imbalanced across an axle | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear fog lamp emits a light other than red |1.3.2e| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Windscreen wiper does not clear the windscreen effectively | 1 |
Nearside Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Nearside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
Offside Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Offside Rear Position lamp not working |4.2.1 |a| |ii|| | 1 |
Brake load sensing valve linkage defective and function impaired |1.1.17 |a|| | 1 |
Offside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear fog lamp lens defective such that emitted light is adversely affected |4.5.1 |b| |ii|| | 1 |
Offside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Stop lamp|s| lens defective such that the emitted light is adversely affected |4.3.1 |b| |ii|| | 1 |
Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Bonnet cannot be secured in the closed position |8.4.1| | 1 |
Nearside Stop lamp|s| lens defective such that the emitted light is adversely affected |4.3.1 |b| |ii|| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Position lamp not working |4.2.1 |a| |ii|| | 1 |
Offside Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Rear Brake load sensing valve linkage defective and function impaired |3.6.E.3| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Emissions not tested |7.0| | 1 |
Fuel system component leaking pump area (6.1.3 (b) (i)) | 1 |
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i)) | 1 |
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i)) | 1 |
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced LOWER WHEEL ARCH (6.1.1 (c) (i)) | 1 |
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced LOWER WHEEL ARCH (6.1.1 (c) (i)) | 1 |
Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i)) | 1 |