Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 8 |
Registration plate lamp issues | 6 |
Brake pipe excessively corroded | 6 |
Headlamp aim out of alignment | 6 |
Parking brake: efficiency below requirements |3.7.B.7| | 4 |
Parking brake: efficiency below requirements |3.7.C.1b| | 3 |
Offside Rear fog lamp not working |1.3.2b| | 3 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Rear fog lamp not working |1.3.2b| | 3 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 3 |
Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 2 |
Registration plate issues | 2 |
Rear fog lamp tell tale not working |1.3.1b| | 2 |
Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 2 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 2 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Brakes imbalanced across an axle | 2 |
Horn not working |1.6.2a| | 1 |
Brake hose excessively deteriorated | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Upper Front suspension has excessive play in a track control arm inner bush |2.5.B.2b| | 1 |
Offside Upper Front suspension has excessive play in a track control arm inner bush |2.5.B.2b| | 1 |
Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Offside Ball joint has excessive play |2.2.B.1f| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Rear Brake pipe excessively chafed |3.6.B.2c| | 1 |
Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
Offside Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
Rear Seat belt retracting mechanism defective |5.2.5b| | 1 |
Windscreen wiper control missing |8.2.1a| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Rear Service brake indicates brake bind |3.7.D.2a| | 1 |
Front Body has a projection caused by damage |6.1.C.1| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Front Anti-roll bar linkage cracked |2.4.G.1| | 1 |
Offside Front Anti-roll bar linkage cracked |2.4.G.1| | 1 |
Nearside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Outer Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Brake hose damaged | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Centre Exhaust system not adequately supported |7.1.1| | 1 |
Rear Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 1 |
Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Fuel tank insecure |7.2.1| | 1 |
An item not tested |Manual| | 1 |
Rear parking brake recording little or no effort | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Rear fog lamp switch faulty |1.3.1a| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
Rear Rear fog lamp not working |1.3.2b| | 1 |
Offside Rear Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Front Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |