Most common failures | No# failures |
---|
Rear brake binding | 5 |
Windscreen wiper does not clear the windscreen effectively | 4 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Front Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 2 |
Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 2 |
Registration plate lamp issues | 2 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Brakes imbalanced across an axle | 2 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 2 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 2 |
Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Registration plate issues | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Nearside Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Offside Front Brake hose damaged and likely to fail |1.1.12 |a|| | 1 |
Offside Front Service brake excessively binding |1.2.1 |f|| | 1 |
Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Brake performance not tested service brake due to flexi hose |1.2.1 |g|| | 1 |
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i)) | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Parking (secondary brake) on a single line braking system imbalanced across an axle Axle 1 (1.3.1 (b) (i)) | 1 |
Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Nearside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Front Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Brake valve leaking wheel cylinder |1.1.7 |d| |i|| | 1 |
Nearside Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear Leaf spring anchor bracket insecure (5.3.1 (a) (i)) | 1 |
Offside Front Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
Rear Mechanical brake component has restricted free movement | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Front Lower Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
Offside Front Lower Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
Nearside Front Battery insecure |1.9.1| | 1 |
Headlamp not working on dipped beam |1.7.5a| | 1 |
Headlamp not working on main beam |1.7.5a| | 1 |
Front Brake pipe inadequately clipped |3.6.B.1| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front coil spring fractured |2.4.C.1a| | 1 |
Nearside Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Rear wheel cylinder leaking |3.6.A.1| | 1 |
Rear parking brake recording little or no effort | 1 |
Exhaust emits excessive dense blue smoke during acceleration |7.3.A.2c| | 1 |
Brake pedal creeps down while the pedal is held under pressure |3.3.B.1a| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Nearside Rear Leaf spring fractured |2.4.B.1a| | 1 |
Brake cable has restricted free movement |3.5.1k| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |