Most common failures | No# failures |
---|
Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 4 |
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 4 |
Offside Rear Stop lamp not working |1.2.1b| | 3 |
Parking brake: efficiency below requirements |3.7.B.7| | 3 |
Registration plate lamp issues | 3 |
Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 3 |
Windscreen wiper does not clear the windscreen effectively | 3 |
Brake pipe excessively corroded | 3 |
Rear brake binding | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 2 |
Offside Front coil spring incomplete |2.4.C.1a| | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Horn not working |1.6.2a| | 2 |
Rear parking brake recording little or no effort | 2 |
Parking brake lever has no reserve travel |3.1.6b| | 2 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 2 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front coil spring incomplete |2.4.C.1a| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 1 |
Nearside Front Wheel bolt|s| missing |4.2.A.1e| | 1 |
Offside Front Wheel bolt|s| missing |4.2.A.1e| | 1 |
Nearside Rear Wheel bolt|s| missing |4.2.A.1e| | 1 |
Offside Rear Wheel bolt|s| missing |4.2.A.1e| | 1 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Rear coil spring incomplete |2.4.C.1a| | 1 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front Headlamp insecure |1.7.3| | 1 |
Nearside Outer Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Headlamp aim out of alignment | 1 |
Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
Headlamp switch insecure |1.7.1| | 1 |
Rear fog lamp switch insecure |1.3.1a| | 1 |
Position lamp switch insecure |1.1.A.1| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Rear fog lamp switch faulty |1.3.1a| | 1 |
Nearside Headlamp insecure |1.7.3| | 1 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Front coil spring fractured |2.4.C.1a| | 1 |
Offside Front coil spring fractured |2.4.C.1a| | 1 |
Offside Rear coil spring fractured |2.4.C.1a| | 1 |
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Brakes imbalanced across an axle | 1 |
Offside Front Ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
Front brake application uneven | 1 |