MOT History from tests of petrol VAUXHALL COMBO VANs year 1993

Review the list of common VAUXHALL COMBO VAN failures below or to perform a specific mot history check on your VAUXHALL then use our popular KnowYourCar service

mot history

Pass percent:16.67%

(The average a petrol VAUXHALL COMBO VAN year 1993 passes without issue)

Based on:12 MOT Tests

Most common failures	No# failures
Brake pipe excessively corroded	6
Registration plate lamp issues	3
Rear parking brake recording little or no effort	3
Parking brake: efficiency below requirements \|3.7.B.7\|	2
Centre Exhaust mounting missing \|7.1.1b\|	2
Offside Rear Stop lamp not working \|1.2.1b\|	1
Hazard warning switch faulty \|1.4.B.1d\|	1
Nearside Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Nearside Rear Braking system leaking \|3.6.A.1\|	1
Rear Mechanical brake component has restricted free movement	1
Rear brake application uneven	1
Nearside Rear rear brake recording little or no effort \|3.7.B.5a\|	1
Offside Front Windscreen wiper blade deteriorated \|8.2.2\|	1
Offside Outer Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Emissions not tested \|7.0\|	1
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Rear coil spring incomplete \|2.4.C.1a\|	1
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Windscreen wiper does not clear the windscreen effectively	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Headlamp not in good working order \|not working\| \|1.2.4a\|	1
Registration plate issues	1
Rear Rear position lamp\|s\| insecure \|1.1.A.3a\|	1
Headlamp aim out of alignment	1
Exhaust emissions carbon monoxide content at idle excessive \|7.3.D.4\|	1
Brakes imbalanced across an axle	1
Nearside Rear Stop lamp not working \|1.2.1b\|	1
Nearside Rear Exhaust system not adequately supported \|7.1.1\|	1
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Rear coil spring fractured \|2.4.C.1a\|	1
Rear Exhaust system not adequately supported \|7.1.1\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Brake pipe excessively corroded	6
Registration plate lamp issues	3
Rear parking brake recording little or no effort	3
Parking brake: efficiency below requirements \|3.7.B.7\|	2
Centre Exhaust mounting missing \|7.1.1b\|	2
Offside Rear Stop lamp not working \|1.2.1b\|	1
Hazard warning switch faulty \|1.4.B.1d\|	1
Nearside Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Nearside Rear Braking system leaking \|3.6.A.1\|	1
Rear Mechanical brake component has restricted free movement	1
Rear brake application uneven	1
Nearside Rear rear brake recording little or no effort \|3.7.B.5a\|	1
Offside Front Windscreen wiper blade deteriorated \|8.2.2\|	1
Offside Outer Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Emissions not tested \|7.0\|	1
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Rear coil spring incomplete \|2.4.C.1a\|	1
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Windscreen wiper does not clear the windscreen effectively	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Headlamp not in good working order \|not working\| \|1.2.4a\|	1
Registration plate issues	1
Rear Rear position lamp\|s\| insecure \|1.1.A.3a\|	1
Headlamp aim out of alignment	1
Exhaust emissions carbon monoxide content at idle excessive \|7.3.D.4\|	1
Brakes imbalanced across an axle	1
Nearside Rear Stop lamp not working \|1.2.1b\|	1
Nearside Rear Exhaust system not adequately supported \|7.1.1\|	1
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Rear coil spring fractured \|2.4.C.1a\|	1
Rear Exhaust system not adequately supported \|7.1.1\|	1

MOT History from tests of petrol VAUXHALL COMBO VANs year 1993

Find us on Facebook