| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 15 |
| Brake pipe excessively corroded | 9 |
| Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 5 |
| Offside Rear fog lamp not working |1.3.2b| | 4 |
| Hazard warning switch faulty |1.4.B.1d| | 4 |
| Registration plate lamp issues | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Parking brake: efficiency below requirements |3.7.B.7| | 3 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Windscreen wiper does not clear the windscreen effectively | 3 |
| Registration plate issues | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 2 |
| Nearside Rear Direction indicator not working |1.4.A.2c| | 2 |
| Brakes imbalanced across an axle | 2 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 2 |
| Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 2 |
| Offside Front Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Offside Windscreen wiper blade deteriorated |8.2.2| | 2 |
| Offside Stop lamp not working |1.2.1b| | 2 |
| Emissions not tested |7.0| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Statutory seat belt missing |5.1.1| | 1 |
| Offside Front Statutory seat belt missing |5.1.1| | 1 |
| Centre Statutory seat belt missing |5.1.1| | 1 |
| Battery insecure |1.9.1| | 1 |
| Horn not working |1.6.2a| | 1 |
| Offside Front Lower Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Offside Rear Leaf spring cracked |2.4.B.1a| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Brake hose excessively deteriorated | 1 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Outer Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Outer Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Inner Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Centre Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar linkage fractured |2.4.G.1| | 1 |
| Battery insecure and likely to cause a short circuit |4.13 |a| |ii|| | 1 |
| Hazard warning switch inoperative nearside not working |4.4.2 |a| |ii|| | 1 |
| Rear Brake load sensing valve seized and ABS not fitted or inoperative |1.1.17 |c| |ii|| | 1 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 1 |
| Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Fuel tank leaking |7.2.3| | 1 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Steering system has excessive free play detected at the steering wheel |steering box fitted| |2.2.A.1a| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Service brake: efficiency below requirements |3.7.C.1a| | 1 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
| Offside Rear Rear fog lamp missing |1.3.2a| | 1 |
| Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
| Front Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Front Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
| Indicator tell tale inoperative |1.4.A.2a| | 1 |
| Direction indicators not working |1.4.A.2c| | 1 |
| Offside Front Brake pipe inadequately supported |3.6.B.1| | 1 |
| Nearside Front Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Offside Front Upper Ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Side repeater incomplete |1.5.A1b| | 1 |
| Front Shock absorber has negligible damping effect |2.7.5| | 1 |
| Nearside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Centre Rear Body has excessive displacement which may lead to loss of vehicle control |6.1.B.1a| | 1 |
| Windscreen has damage | 1 |
| Offside Rear Brake hose bulging under pressure |3.6.B.3| | 1 |
| Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Centre Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Rear Brake pipe leaking |3.6.A.1| | 1 |
| Brake reservoir fluid level decreases after several pedal applications |3.3.C.1| | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Rear Rear fog lamp not working |1.3.2b| | 1 |
| Steering column movement between the shaft and steering wheel |2.1.2b| | 1 |
| Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Headlamp not working on main beam |1.7.5a| | 1 |
| Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Offside Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Front Upper Suspension arm worn and seriously weakened |2.4.G.1| | 1 |
| Offside Front Lower Front suspension has excessive movement at a suspension ball joint |2.5.A.1c| | 1 |
| Nearside Front Wheel nut|s| missing |4.2.A.1e| | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Headlamp not working on main beam |1.7.5a| | 1 |
| Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
| Offside Obligatory mirror missing |8.1.1| | 1 |
| Nearside Side repeater missing |1.4.A.2b| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |