MOT History from tests of diesel VAUXHALL BELMONTs year 1991

Review the list of common VAUXHALL BELMONT failures below or to perform a specific mot history check on your VAUXHALL then use our popular KnowYourCar service

mot history

Pass percent:62.96%

(The average a diesel VAUXHALL BELMONT year 1991 passes without issue)

Based on:27 MOT Tests

Most common failures	No# failures
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Nearside Front constant velocity joint gaiter split \|2.5.C.1a\|	2
Nearside Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Fuel system component leaking \|7.2.3\|	1
Offside Front constant velocity joint gaiter insecurely mounted to its housing \|2.5.C.1a\|	1
Registration plate lamp issues	1
Stop lamp not working \|1.2.1b\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Fuel pipe leaking \|7.2.3\|	1
Nearside Front Road wheel bead rim badly distorted \|4.2.A.1a\|	1
Registration plate issues	1
Offside Outer Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Outer Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Outer Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Upper Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Fuel pipe leaking \|7.2.3\|	1
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Side repeater incorrect colour \|1.4.A.2f\|	1
Horn not working \|1.6.2a\|	1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Fuel hose leaking \|7.2.3\|	1
Exhaust emits an excessive level of metered smoke for a turbo charged engine \|7.4.B.3b\|	1
Brake pipe excessively corroded	1
Nearside Rear coil spring incomplete \|2.4.C.1a\|	1
Nearside Rear Shock absorber has an excessively worn bush \|2.7.4\|	1
Offside Rear Shock absorber has an excessively worn bush \|2.7.4\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Nearside Front constant velocity joint gaiter split \|2.5.C.1a\|	2
Nearside Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Fuel system component leaking \|7.2.3\|	1
Offside Front constant velocity joint gaiter insecurely mounted to its housing \|2.5.C.1a\|	1
Registration plate lamp issues	1
Stop lamp not working \|1.2.1b\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Fuel pipe leaking \|7.2.3\|	1
Nearside Front Road wheel bead rim badly distorted \|4.2.A.1a\|	1
Registration plate issues	1
Offside Outer Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Outer Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Outer Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Upper Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Fuel pipe leaking \|7.2.3\|	1
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Side repeater incorrect colour \|1.4.A.2f\|	1
Horn not working \|1.6.2a\|	1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Fuel hose leaking \|7.2.3\|	1
Exhaust emits an excessive level of metered smoke for a turbo charged engine \|7.4.B.3b\|	1
Brake pipe excessively corroded	1
Nearside Rear coil spring incomplete \|2.4.C.1a\|	1
Nearside Rear Shock absorber has an excessively worn bush \|2.7.4\|	1
Offside Rear Shock absorber has an excessively worn bush \|2.7.4\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1

MOT History from tests of diesel VAUXHALL BELMONTs year 1991

Find us on Facebook