MOT History from tests of petrol TGB 304s year 2005

Review the list of common TGB 304 failures below or to perform a specific mot history check on your TGB then use our popular KnowYourCar service

mot history

Pass percent:75.47%

(The average a petrol TGB 304 year 2005 passes without issue)

Based on:106 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	4
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Headlamp not working on dipped beam (4.1.1 (a) (ii))	2
Headlamp aim beam image kick up to the offside \|1.6\|	2
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Headlamp aim not tested (4.1.2 (b))	1
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Nearside Front Lower Brake caliper\|s\| securing bolt\|s\| loose \|3.2.A1j\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Nearside Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Front suspension assembly component loose \|2.3.1\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Offside Steering lock stop ineffective \|2.1.3\|	1
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Offside Front Direction indicator not working \|1.5.1c\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Offside Rear Direction indicator not working \|1.5.1c\|	1
Indicator tell tale not functioning \|1.5.2\|	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Front Brake disc\|s\| insecure \|3.2.A1g\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	4
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Headlamp not working on dipped beam (4.1.1 (a) (ii))	2
Headlamp aim beam image kick up to the offside \|1.6\|	2
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Headlamp aim not tested (4.1.2 (b))	1
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Nearside Front Lower Brake caliper\|s\| securing bolt\|s\| loose \|3.2.A1j\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Nearside Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Front suspension assembly component loose \|2.3.1\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Offside Steering lock stop ineffective \|2.1.3\|	1
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Offside Front Direction indicator not working \|1.5.1c\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Offside Rear Direction indicator not working \|1.5.1c\|	1
Indicator tell tale not functioning \|1.5.2\|	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Front Brake disc\|s\| insecure \|3.2.A1g\|	1

MOT History from tests of petrol TGB 304s year 2005

Find us on Facebook