MOT History from tests of petrol TGB 303s year 2010

Review the list of common TGB 303 failures below or to perform a specific mot history check on your TGB then use our popular KnowYourCar service

mot history

Pass percent:58.62%

(The average a petrol TGB 303 year 2010 passes without issue)

Based on:58 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	3
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	2
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear reflector on motorcycle missing \|1.4.1\|	2
Stop lamp remains on when the brakes are released	2
Riders seat insecure Held on with elastic \|6.2.1a\|	1
Headlamp insecure \|1.2.3b\|	1
Horn not working \|1.7.3a\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	1
Riders seat insecure \|6.2.1a\|	1
Exhaust mounting missing \|7.1.1c\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Nearside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
Front Brake disc contaminated \|1.1.14 \|b\|\|	1
Brake lever has insufficient reserve travel Both front and rear brake levers \|1.1.2 \|a\|\|	1
Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	1
Rear Shock absorber has negligible damping effect (5.3.2 (b))	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Front Headlamp aim beam image kick up to the offside \|1.6\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Rear Position lamp not working (4.2.1 (a))	1
Front Stop lamp not working (4.3.1 (a) (ii))	1
Rear Stop lamp not working (4.3.1 (a) (ii))	1
Nearside Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Rear reflector missing (4.8.2 (a) (ii))	1
Steering headbearing has excessive free play \|2.2.2\|	1
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Handlebar mounting clamp bolt loose \|2.1.1a\|	1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	3
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	2
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear reflector on motorcycle missing \|1.4.1\|	2
Stop lamp remains on when the brakes are released	2
Riders seat insecure Held on with elastic \|6.2.1a\|	1
Headlamp insecure \|1.2.3b\|	1
Horn not working \|1.7.3a\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	1
Riders seat insecure \|6.2.1a\|	1
Exhaust mounting missing \|7.1.1c\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Nearside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
Front Brake disc contaminated \|1.1.14 \|b\|\|	1
Brake lever has insufficient reserve travel Both front and rear brake levers \|1.1.2 \|a\|\|	1
Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	1
Rear Shock absorber has negligible damping effect (5.3.2 (b))	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Front Headlamp aim beam image kick up to the offside \|1.6\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Rear Position lamp not working (4.2.1 (a))	1
Front Stop lamp not working (4.3.1 (a) (ii))	1
Rear Stop lamp not working (4.3.1 (a) (ii))	1
Nearside Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Rear reflector missing (4.8.2 (a) (ii))	1
Steering headbearing has excessive free play \|2.2.2\|	1
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Handlebar mounting clamp bolt loose \|2.1.1a\|	1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1

MOT History from tests of petrol TGB 303s year 2010

Find us on Facebook