Most common failures | No# failures |
---|
Headlamp aim out of alignment | 16 |
Steering headbearing has excessive free play |2.2.2| | 14 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 7 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Horn not working |1.7.3a| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Handlebar mounting clamp bolt loose |2.1.1a| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front suspension assembly component excessively bent |2.3.1| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear reflector on motorcycle obscured |1.4.1| | 2 |
Registration plate issues | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Headlamp damaged and function impaired |1.2.3a| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear wheel has a missing wheel nut|s| |4.2.3a| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear All position lamps do not illuminate immediately when switched on bulb blown |1.1.3a| | 1 |
Centre Front Upper Fork yoke deformed |2.1.1b| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Front Motorcycle structure excessively distorted |6.1.1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Nearside Front Footrest insecure (6.2.12 (a)) | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Nearside Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Rear Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Rear Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Centre Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies front and rear |1.3.1a| | 1 |
Nearside Rear Lower Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Motorcycle structure is fractured and structural rigidity is significantly reduced mudguard |6.1.1 |a| |i|| | 1 |
Motorcycle structure joining/attachment plate or fastening insecure stand locking devise missing |6.1.1 |b| |i|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Fuel cap ineffective could not be opened to inspect (6.1.3 (b) (i)) | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Front Brake caliper insecurely mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Rear reflector on motorcycle dirty and function impaired |1.4.2a| | 1 |
Nearside Front Shock absorber has a serious fluid leak Fork oil seal leaking (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak Fork oil seal leaking (5.3.2 (b)) | 1 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
An item not tested |Manual| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Headlamp aim not tested (4.1.2 (b)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Fuel cap ineffective No key to check seal |6.1.3 |b| |i|| | 1 |