| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 19 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 16 |
| Steering headbearing has excessive free play |2.2.2| | 12 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 9 |
| Rear reflector on motorcycle missing |1.4.1| | 8 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
| Rear reflector on motorcycle obscured |1.4.1| | 6 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Registration plate issues | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 3 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 3 |
| Horn not working |1.7.3a| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Direction indicators not working |1.5.1c| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 3 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 2 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Steering linkage has excessive free play |2.2.2| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Brake lever cannot be applied smoothly |3.1.3d| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Exhaust excessively deteriorated |7.1.1a| | 2 |
| Handlebar mounting clamp loose |2.1.1a| | 2 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Central Front Lower Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Rear Brake lever insecure (1.1.2 (e) (i)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on dipped beam & bulb not installed correctly (4.1.1 (a) (ii)) | 1 |
| All position lamps not working (4.2.1 (a)) | 1 |
| Front Brake master cylinder defective but brake still operating (1.1.10 (b) (i)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Front Brake fluid significantly below minimum mark |1.1.10 |d| |ii|| | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Registration plate lamp issues | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Handlebar mounting so insecure that steering is adversely affected (2.2.1 (a) (ii)) | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Offside Direction indicators not working |1.5.1c| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Offside Lower Rear suspension has severe distortion of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Plate brake test indicates a severely grabbing brake |3.3.B1b| | 1 |
| Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Steering operation linkage fouling when handlebars turned from lock to lock (2.1.4 (a)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Front Brake performance not tested brake binding |3.3| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil Stantion has pitting |2.3.3| | 1 |
| Fuel cap ineffective |6.1.3 |b| |i|| | 1 |
| Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Fuel pipe leaking |7.2.1a| | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Nearside Rear Brake lever insecure |3.1.2a| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Nearside Front Headlamp insecure |1.2.3b| | 1 |
| Front Lower Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Lower Brake component has an inadequate repair |3.1.5| | 1 |
| Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Nearside Rear Upper Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Offside Front Upper Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Offside Rear Lower Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Offside Rear Lower Exhaust silencer likely to become detached |8.1.1 |b| |ii|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Nearside Rear Upper Direction indicator incorrect colour |1.5.1b| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Front Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front suspension assembly component excessively bent |2.3.1| | 1 |
| Brake performance not tested |3.3| | 1 |
| Front Brake component has an inadequate repair |3.1.5| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Front Front suspension assembly component excessively bent |2.3.1| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Centre Front Upper Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Centre Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Rear Brake lever attachment screws loose |3.1.2b| | 1 |
| Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Lower Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Nearside Front Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
| Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Lower Steering headbearing has excessive free play |2.2.2| | 1 |