>

MOT History from tests of petrol TALBOT SAMBAs year 1982

Review the list of common TALBOT SAMBA failures below or to perform a specific mot history check on your TALBOT then use our popular KnowYourCar service

mot history
Pass percent:59.76%
(The average a petrol TALBOT SAMBA year 1982 passes without issue)
Based on:82 MOT Tests
Most common failuresNo# failures
Windscreen wiper does not clear the windscreen effectively7
Headlamp aim out of alignment6
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|4
Brakes imbalanced across an axle4
Exhaust emissions carbon monoxide content excessive |7.3.B.1a|3
Brake pipe excessively corroded3
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|3
Rear brake binding3
Offside Stop lamp not working |1.2.1b|2
Nearside rear brake recording little or no effort |3.7.B.5a|2
Rear parking brake recording little or no effort2
Parking brake: efficiency below requirements |3.7.B.7|2
Nearside Stop lamp not working |1.2.1b|2
Nearside Rear Stop lamp not working |1.2.1b|2
Offside Rear Stop lamp not working |1.2.1b|2
Nearside Headlamp not working on dipped beam |1.7.5a|2
Offside Rear fog lamp not working |1.3.2b|2
Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b|1
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Front passenger door cannot be opened from outside the vehicle |6.2.B.1b|1
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1|1
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1|1
Horn not working |1.6.2a|1
Registration plate lamp issues1
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a|1
Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Battery insecure |1.9.1|1
Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2|1
Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2|1
Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.3.B.1|1
Nearside Front Direction indicators have a product on the light sources so they are not visible from a reasonable distance lense broken |1.4.A.2e|1
Offside Outer Body has a projection caused by corrosion sill |6.1.C.1|1
Nearside Front Position lamp not working |4.2.1 |a||1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Rear All position lamps adversely affected by the operation of another lamp |1.1.A.3f|1
Offside Rear All position lamps adversely affected by the operation of another lamp |1.1.A.3f|1
Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Direction indicators not in good working order |function impaired| |1.5.A1b|1
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Front position lamp|s| not in good working order |function impaired| |1.1.4a|1
Offside Front Front constant velocity joint gaiter split |2.5.C.1a|1
Offside Rear Shock absorber detached |2.7.2b|1
Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Headlamp insecure |1.7.3|1
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a|1
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a|1
Rear Stop lamp not working |1.2.1b|1
Rear fog lamp not working |1.3.2b|1
Offside Headlamp not working on main beam |1.7.5a|1
Nearside Windscreen wiper blade deteriorated |8.2.2|1
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f|1
Offside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h|1
Offside Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3|1
Offside rear brake recording little or no effort |3.7.B.5a|1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|1
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d|1
Offside Rear Direction indicator not working |1.4.A.2c|1
Offside Front constant velocity joint gaiter split |2.5.C.1a|1
Offside Indicator tell tale inoperative |1.4.A.2a|1
Statutory seat belt missing |5.1.1|1
Nearside Headlamp not working on main beam |1.7.5a|1
Offside Front Direction indicator not working |1.4.A.2c|1
Nearside Windscreen wiper blade missing |8.2.2|1
Offside Rear Body has a sharp edge caused by damage |6.1.C.1|1
Nearside Front Body has a sharp edge caused by damage |6.1.C.1|1
Lower Steering column flexible coupling is excessively deteriorated |2.1.5|1
Service brake: efficiency below requirements |3.7.B.7|1
Nearside Rear rear brake recording little or no effort |3.7.B.5a|1
Nearside Rear Rear fog lamp not working |1.3.2b|1
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Exhaust emissions hydrocarbon content excessive |7.3.B.1b|1
Exhaust engine idle speed too high |7.3.A.2a|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy