Most common failures | No# failures |
---|
Brake pipe excessively corroded | 11 |
Registration plate lamp issues | 8 |
Exhaust system not adequately supported |7.1.1| | 5 |
Windscreen wiper does not clear the windscreen effectively | 5 |
Service brake: efficiency below requirements |3.7.B.7| | 4 |
Headlamp aim out of alignment | 4 |
Front brake disc in such a condition that it is seriously weakened | 3 |
Offside Front Body has an unsafe modification hole in inner arch (6.2.1 (d) (i)) | 2 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Battery insecure |1.9.1| | 2 |
Rear fog lamp not working |1.3.2b| | 2 |
Rear fog lamp tell tale not working |1.3.1b| | 2 |
Offside Front Direction indicator not working |1.4.A.2c| | 2 |
Registration plate issues | 2 |
Nearside Rear Leaf spring deteriorated and seriously weakened |2.4.B.1a| | 2 |
Offside Rear Leaf spring deteriorated and seriously weakened |2.4.B.1a| | 2 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Offside Headlamp not working on main beam |1.7.5a| | 2 |
Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Body has an unsafe modification nearisde hole in sill (6.2.1 (d) (i)) | 1 |
Offside Body has an unsafe modification hole in inner sill (6.2.1 (d) (i)) | 1 |
Nearside Rear Body has an unsafe modification hole in leaf spring bracket (6.2.1 (d) (i)) | 1 |
Emissions oxygen sensor obviously defective (8.2.1.1 (a)) | 1 |
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring mount (5.3.6 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mount (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring mount (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mount (5.3.6 (a) (i)) | 1 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Offside Side repeater not working (4.4.1 (a) (ii)) | 1 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Stop lamp not working |1.2.1b| | 1 |
Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Leaf spring anchor bracket bolt missing x2 |2.4.B.6c| | 1 |
Offside Leaf spring anchor bracket bolt missing x1 |2.4.B.6c| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring hanger |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring hanger |2.4.A.3| | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Rear Body has an unsafe modification hole at leaf spring mount (6.2.1 (d) (i)) | 1 |
Offside Rear Body has an unsafe modification hole at leaf spring mount (6.2.1 (d) (i)) | 1 |
Offside Rear Body has an unsafe modification hole at upper shocker mount (6.2.1 (d) (i)) | 1 |
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
Headlamp not working on dipped beam or full beam (4.1.1 (a) (ii)) | 1 |
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Offside Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Nearside Front Position lamp not working |4.2.1 |a|| | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill |6.1.1 |c| |i|| | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch |6.1.1 |c| |i|| | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis / spring hanger |6.1.1 |c| |i|| | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Headlamp not working on dipped beam |1.7.5a| | 1 |
Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Rear Upper Stop lamp not working |1.2.1b| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Seat belt retracting mechanism defective |5.2.5b| | 1 |
Brakes imbalanced across an axle | 1 |
Rear brake application uneven | 1 |
Driver`s seat backrest cannot be secured in the upright position. |6.2.5 |b| |ii|| | 1 |
Nearside Rear Outline marker lamp not working |4.2.1 |a|| | 1 |
Offside Front Position lamp not working |4.2.1 |a|| | 1 |
Offside Lower Stop lamp(s) not working + upper stop light (4.3.1 (a) (ii)) | 1 |
Offside Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Nearside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
Offside Windscreen wiper blade missing |8.2.2| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
Hydraulic fluid leaking excessively |8.4.1 |a| |i|| | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 1 |
Horn not working |1.6.2a| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Brake hose damaged | 1 |
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Electrical wiring insecure |1.9.2a| | 1 |
Front Brake pipe leaking |3.6.A.1| | 1 |
Offside Front Brake pipe leaking |3.6.A.1| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Fuel cap/sealing device missing |7.2.4a| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Emissions not tested |7.0| | 1 |
Nearside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Nearside Rear Leaf spring splayed and action impaired |2.4.B.1c| | 1 |
Nearside Outer Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front Front constant velocity joint is insecure |2.5.C.1b| | 1 |
Nearside Upper Rear position lamp|s| not working |1.1.A.3b| | 1 |
Windscreen washer not working | 1 |
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Nearside Side repeater not working (4.4.1 (a) (ii)) | 1 |