Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 14 |
Brake pipe excessively corroded | 14 |
Headlamp aim out of alignment | 13 |
Brakes imbalanced across an axle | 8 |
Parking brake: efficiency below requirements |3.7.B.7| | 7 |
Registration plate lamp issues | 7 |
Rear brake binding | 7 |
Offside Front position lamp|s| not working |1.1.A.3b| | 6 |
Brake hose excessively deteriorated | 5 |
Offside Stop lamp not working |1.2.1b| | 5 |
Service brake: efficiency below requirements |3.7.B.7| | 5 |
Nearside Side repeater not working |1.4.A.2c| | 5 |
Offside Headlamp insecure |1.7.3| | 4 |
Exhaust mounting missing |7.1.1b| | 4 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Exhaust system not adequately supported |7.1.1| | 3 |
Battery insecure |1.9.1| | 3 |
Offside Front Direction indicator not working |1.4.A.2c| | 3 |
Offside Headlamp not working on dipped beam |1.7.5a| | 3 |
Front brake disc in such a condition that it is seriously weakened | 3 |
Fuel system component leaking |7.2.3| | 2 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside rear brake recording little or no effort |3.7.B.5a| | 2 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 2 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Horn not working |1.6.2a| | 2 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 2 |
Windscreen washer not working | 2 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 2 |
Nearside Rear Service brake excessively binding (1.2.1 (f)) | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
Rear brake application uneven | 2 |
Windscreen has damage | 2 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Offside Headlamp not working on main beam |1.7.5a| | 2 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Rear Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front Lower Ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front position lamp|s| not working |1.1.A.3b| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Nearside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Suspension spring mounting prescribed area is severely distorted |2.4.A.3| | 1 |
Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Body has a projection caused by damage |6.1.C.1| | 1 |
Offside Body has a projection caused by damage |6.1.C.1| | 1 |
Front passenger seat insecure |6.2.3| | 1 |
Driver`s seat insecure |6.2.A.1| | 1 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Offside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
Brake pedal creeps down while the pedal is held under pressure |3.3.B.1a| | 1 |
Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 1 |
Rear Brake pipe leaking |3.6.A.1| | 1 |
Nearside Front Direction indicator insecure |1.4.A.2b| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Front brake disc excessively pitted |3.5.1h| | 1 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Vehicle structure has a fracture which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Fuel system component leaking injection pump |7.2.3| | 1 |
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded side and top |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded side and top |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded at tie bar mounting |2.4.A.3| | 1 |
Offside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement front bush missing |2.4.G.2| | 1 |
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Indicator tell tale inoperative |1.4.A.2a| | 1 |
Offside Front Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Offside Front Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
Offside Headlamp reflector seriously defective (4.1.1 (b) (ii)) | 1 |
Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
Offside Steering locking device ineffective trackrod adjuster nut loose. (2.1.3 (d)) | 1 |
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced [within 30 cms of suspension mount] chassis/inner wing. (6.1.1 (c) (i)) | 1 |
Rear Brake load sensing valve linkage defective and function impaired |1.1.17 |a|| | 1 |
Battery insecure and likely to cause a short circuit |4.13 |a| |ii|| | 1 |
Brake fluid contaminated |1.8 |a|| | 1 |
Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Offside Rear Service brake excessively binding |1.2.1 |f|| | 1 |
Service brake efficiency less than 50% of the required value |1.2.2 |a| |ii|| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
Nearside Electrical wiring likely to touch hot or rotating parts touching driveshaft (4.11 (a) (iii)) | 1 |
Electrical wiring insecure and connectors likely to become disconnected engine bay (4.11 (a) (ii)) | 1 |
Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear Body panel insecure (6.2.1 (a) (i)) | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Body has a projection caused by corrosion |6.1.C.1| | 1 |
Nearside Front Front constant velocity joint is insecure |2.5.C.1b| | 1 |
Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Nearside Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Outer Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Outer Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch (6.2.2 (d) (i)) | 1 |
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch (6.2.2 (d) (i)) | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
All position lamps not working |4.2.1 |a|| | 1 |
Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
Nearside Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Side repeater insecure |1.4.A.2b| | 1 |
rear brakes release unevenly |3.7.B.4| | 1 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Front Brake pipe leaking |3.6.A.1| | 1 |
Nearside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
Nearside Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
Headlamp not working on dipped beam |1.7.5a| | 1 |
Headlamp not working on main beam |1.7.5a| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Headlamp switch faulty |1.7.1| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front Lower Radius arm ball joint dust cover missing |2.4.G.2| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Front Front position lamp|s| insecure |1.1.A.3a| | 1 |
Nearside Front Ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Brake pipe fouled by moving parts |3.6.B.2a| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Direction indicator insecure on wing |1.4.A.2b| | 1 |
Offside Front Direction indicator insecure on wing |1.4.A.2b| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Brake hose has insufficient room to move | 1 |
Brake has no servo assistance |3.3.B.2| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Trailer electrical socket |13 pin| not operating the trailer lamps as intended |1.9.4| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded step |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded step |2.4.A.3| | 1 |
Nearside Front Braking system leaking flexi burst during brake test |3.6.A.1| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch x2 holes. |2.4.A.3| | 1 |
Fuel pipe union leaking under bonnet |7.2.3| | 1 |
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected out rigger |5.3.6 |a| |ii|| | 1 |
Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
Offside Front Drivers door cannot be opened from outside the vehicle (6.2.3 (a)) | 1 |
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch to floor (6.2.2 (d) (i)) | 1 |
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill (6.2.2 (d) (i)) | 1 |
Offside Rear Inner Body component insecure arch to floor (6.2.1 (a) (i)) | 1 |
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Nearside Inner Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Inner Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside Windscreen wiper blade missing |8.2.2| | 1 |
Offside Front Headlamp not working on main beam |1.7.5a| | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front Headlamps matched pair are incorrectly positioned in high beam when on dip beam |1.7.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Steering rack gaiter insecure |2.2.D.2d| | 1 |
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Nearside Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i|| | 1 |
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chasssie- sill |6.2.2 |d| |i|| | 1 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point |6.1.B.2| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point |6.1.B.2| | 1 |
Nearside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
Nearside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Centre Exhaust system not adequately supported |7.1.1| | 1 |
Offside Front Seat belt anchorage prescribed area is inadequately repaired foam (7.1.1 (a) (i)) | 1 |
Body has an unsafe modification windscreen and scuttle held together with duct tape (6.2.1 (d) (i)) | 1 |
Nearside Other passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 1 |
Drivers seat insecure (6.2.5 (a) (ii)) | 1 |
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Inner Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Headlamp insecure |1.7.3| | 1 |
Nearside Rear position lamp|s| insecure |1.1.A.3a| | 1 |
Offside Rear position lamp|s| insecure |1.1.A.3a| | 1 |
Nearside Statutory seat belt of the wrong type. |5.1.1| | 1 |
Nearside Obligatory mirror insecure |8.1.1| | 1 |
Offside Obligatory mirror insecure |8.1.1| | 1 |
Nearside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Offside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Front Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Offside Front Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Nearside Rear Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Offside Rear Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
Nearside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
Nearside Front Seat belt affected by an insecure seat fixing |5.2.1b| | 1 |
Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Nearside Front Obligatory mirror insecure |8.1.1| | 1 |
Centre Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
Nearside Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Rear Position lamp not working x2 (4.2.1 (a) (ii)) | 1 |
Offside Front Headlamp insecure (4.1.1 (c)) | 1 |
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed x3 (5.3.6 (a) (i)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill door step (5.3.6 (a) (i)) | 1 |
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper inner wheel arch holed (5.3.6 (a) (i)) | 1 |