MOT History from tests of petrol TALBOT ALPINEs year 1986

Review the list of common TALBOT ALPINE failures below or to perform a specific mot history check on your TALBOT then use our popular KnowYourCar service

mot history

Pass percent:52.17%

(The average a petrol TALBOT ALPINE year 1986 passes without issue)

Based on:23 MOT Tests

Most common failures	No# failures
Exhaust emissions carbon monoxide content excessive \|7.3.B.1a\|	3
Parking brake: efficiency below requirements \|3.7.C.1b\|	2
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement \|7.2.4b\|	2
Nearside Front Front passenger door cannot be opened from outside the vehicle \|6.2.B.1b\|	2
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Offside Rear Rear fog lamp not working \|1.3.2b\|	2
Registration plate lamp issues	2
Headlamp aim out of alignment	2
Offside Front Track rod end ball joint has excessive play \|2.2.B.1f\|	1
Offside Front Steering rack gaiter insecure \|2.2.D.2d\|	1
Nearside Front Windscreen wiper blade deteriorated \|8.2.2\|	1
Offside Front Windscreen wiper blade deteriorated \|8.2.2\|	1
Nearside Front Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Nearside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Headlamp aim not tested \|1.8.A.1c\|	1
Service brake: efficiency below requirements \|3.7.C.1a\|	1
Headlamp not working on dipped beam \|1.7.5a\|	1
Headlamp not working on main beam \|1.7.5a\|	1
Headlamp aim not tested \|1.8.A.1c\|	1
Offside Front Headlamp excessively deteriorated so that the light output is severely reduced \|1.7.5a\|	1
Nearside Front Suspension component mounting prescribed area is inadequately repaired \|2.4.A.3\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Emissions not tested \|7.0\|	1
Front passenger door cannot be opened from outside the vehicle \|6.2.B.1b\|	1
Windscreen wiper does not clear the windscreen effectively	1
Body insecure and dangerous to other road users \|6.1.B.1b\|	1
All position lamps not working \|1.1.A.3b\|	1
Nearside Front Front passenger door cannot be opened from inside the vehicle \|6.2.B.1b\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch close to strut mounting \|2.4.A.3\|	1
Fuel cap/sealing device does not fasten securely by positive means \|7.2.4b\|	1
Brake pedal anti-slip provision incomplete \|3.3.A.1b\|	1
Nearside Front Headlamp insecure \|1.7.3\|	1
Nearside Side repeater not working \|1.4.A.2c\|	1
Offside Side repeater not working \|1.4.A.2c\|	1
Nearside Rear position lamp\|s\| excessively deteriorated so that it is not visible from a reasonable distance \|1.1.A.3d\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Exhaust emissions carbon monoxide content excessive \|7.3.B.1a\|	3
Parking brake: efficiency below requirements \|3.7.C.1b\|	2
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement \|7.2.4b\|	2
Nearside Front Front passenger door cannot be opened from outside the vehicle \|6.2.B.1b\|	2
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Offside Rear Rear fog lamp not working \|1.3.2b\|	2
Registration plate lamp issues	2
Headlamp aim out of alignment	2
Offside Front Track rod end ball joint has excessive play \|2.2.B.1f\|	1
Offside Front Steering rack gaiter insecure \|2.2.D.2d\|	1
Nearside Front Windscreen wiper blade deteriorated \|8.2.2\|	1
Offside Front Windscreen wiper blade deteriorated \|8.2.2\|	1
Nearside Front Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Nearside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Headlamp aim not tested \|1.8.A.1c\|	1
Service brake: efficiency below requirements \|3.7.C.1a\|	1
Headlamp not working on dipped beam \|1.7.5a\|	1
Headlamp not working on main beam \|1.7.5a\|	1
Headlamp aim not tested \|1.8.A.1c\|	1
Offside Front Headlamp excessively deteriorated so that the light output is severely reduced \|1.7.5a\|	1
Nearside Front Suspension component mounting prescribed area is inadequately repaired \|2.4.A.3\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Emissions not tested \|7.0\|	1
Front passenger door cannot be opened from outside the vehicle \|6.2.B.1b\|	1
Windscreen wiper does not clear the windscreen effectively	1
Body insecure and dangerous to other road users \|6.1.B.1b\|	1
All position lamps not working \|1.1.A.3b\|	1
Nearside Front Front passenger door cannot be opened from inside the vehicle \|6.2.B.1b\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch close to strut mounting \|2.4.A.3\|	1
Fuel cap/sealing device does not fasten securely by positive means \|7.2.4b\|	1
Brake pedal anti-slip provision incomplete \|3.3.A.1b\|	1
Nearside Front Headlamp insecure \|1.7.3\|	1
Nearside Side repeater not working \|1.4.A.2c\|	1
Offside Side repeater not working \|1.4.A.2c\|	1
Nearside Rear position lamp\|s\| excessively deteriorated so that it is not visible from a reasonable distance \|1.1.A.3d\|	1

MOT History from tests of petrol TALBOT ALPINEs year 1986

Find us on Facebook