>

MOT History from tests of petrol TAIWAN GOLDEN BEE 303s year 2012

Review the list of common TAIWAN GOLDEN BEE 303 failures below or to perform a specific mot history check on your TAIWAN GOLDEN BEE then use our popular KnowYourCar service

mot history
Pass percent:74.60%
(The average a petrol TAIWAN GOLDEN BEE 303 year 2012 passes without issue)
Based on:189 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment7
Brake hose damaged7
Rear Brake lever has inadequate reserve travel |3.1.3b|3
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Exhaust is leaking and excessively noisey |7.1.1b|3
Wheel alignment incorrect which adversely affects the handling |2.5.1|3
Headlamp aim beam image kick up to the offside |1.6|2
Nearside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|2
Front wheel bearings are excessively rough |2.3.5b|2
Front wheel bearings have excessive free play |2.3.5b|2
Front Roller brake test indicates a binding brake |3.3.A1a|2
Rear Shock absorber has negligible damping effect |5.3.2 |b||2
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|2
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Headlamp aim not tested |1.6|1
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Nearside Rear Footrest missing |6.2.1a|1
Offside Rear Footrest missing |6.2.1a|1
Front Brake hose leaking fluid |3.2.B4|1
Front Brake hose which buldges |3.2.B4|1
Nearside Front Front wheel bearings have excessive free play |2.3.5b|1
Front Front wheel bearings are excessively rough |2.3.5b|1
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))1
Nearside Front Direction indicator not working (4.4.1 (a) (ii))1
Riders seat insecure |6.2.1a|1
Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Stop lamp not working (4.3.1 (a) (ii))1
Nearside Rear Lower Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i))1
Offside Rear Lower Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i))1
Throttle operating incorrectly (6.2.7 (a) (i))1
Nearside Brake lever has insufficient reserve travel (1.1.2 (a))1
Rear reflector missing (4.8.2 (a) (ii))1
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Exhaust has a major leak of exhaust gases emmision tube? |6.1.2 |a||1
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Front Plate brake test indicates a binding brake |3.3.B1a|1
Centre Front Handlebar mounting clamp bolt loose |2.1.1a|1
Central Rear Rear reflector missing (4.8.2 (a) (ii))1
Offside Rear Lower Footrest insecure Passenger footrest missing split pin from pivot. (6.2.12 (a))1
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Rear Brake lever has insufficient reserve travel |1.1.2 |a||1
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Direction indicator not working |1.5.1c|1
Front Stop lamp does not illuminate immediately a brake applies front brake light does not illuminate |1.3.1a|1
Front All position lamps do not illuminate immediately when switched on front position light does not illuminate |1.1.3a|1
Offside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Front Fork yoke deformed |2.1.1b|1
Front suspension assembly component excessively misaligned |2.3.1|1
Front suspension assembly component excessively bent |2.3.1|1
Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Offside Footrest insecure |6.2.1a|1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Direction indicators affected by the operation of another lamp rear brake light |1.5.1c|1
Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Brake lever has inadequate reserve travel rear control |3.1.3b|1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Rear Brake cable excessively corroded |1.1.15 |b||1
Headlamp dipped beam affected by the operation of another lamp |1.2.2c|1
Headlamp main beam affected by the operation of another lamp |1.2.2c|1
Headlamp switch faulty |1.2.4|1
Nearside Brake lever has inadequate reserve travel |3.1.3b|1
Front Brake component leaking fluid |3.2.B4|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy