| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 49 |
| Drive chain excessively loose |6.2.1d| | 31 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 15 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 15 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 14 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
| Steering headbearing has excessive free play |2.2.2| | 11 |
| Drive chain worn to excess |6.2.1e| | 10 |
| Horn not working |1.7.3a| | 9 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 7 |
| Nearside Rear Footrest missing |6.2.1a| | 6 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 6 |
| Offside Rear Footrest missing |6.2.1a| | 5 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 5 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 4 |
| Offside Rear Footrest missing (6.2.12 (a)) | 4 |
| Rear Position lamp not working (4.2.1 (a)) | 4 |
| Front wheel bearings are excessively rough |2.3.5b| | 4 |
| Stop lamp not working (4.3.1 (a) (ii)) | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 4 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 4 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 3 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 3 |
| Nearside Drive chain excessively loose |6.2.1d| | 3 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 3 |
| Horn not working (7.7 (a)) | 3 |
| All direction indicators not working (4.4.1 (a) (ii)) | 3 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
| Handlebar deformed |2.1.1b| | 3 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Fuel tank leaking |7.2.1a| | 3 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Front Position lamp not working |4.2.1 |a|| | 3 |
| Stop lamp remains on when the brakes are released | 3 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Front Brake fluid not visible |1.1.10 |d| |iii|| | 2 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 2 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Nearside Drive chain worn to excess |6.2.1e| | 2 |
| Rear suspension component loose |2.4.A.1a| | 2 |
| Nearside Footrest insecure |6.2.1a| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Indicator switch insecure |1.5.4| | 2 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Fuel system component leaking |7.2.1a| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 2 |
| Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 2 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
| Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 2 |
| Rear Footrest missing |6.2.12 |a|| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Horn not working |7.7 |a| |ii|| | 2 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
| Front Handlebar deformed |2.1.1b| | 2 |
| Headlamp insecure (4.1.1 (c)) | 2 |
| Rear Brake excessively binding |1.2.1 |f|| | 2 |
| Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
| Offside Rear Footrest missing |6.2.12 |a|| | 1 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Wheel bearing play so excessive it is likely to break up rear wheel sprocket carrier has free play (5.1.3 (a) (ii)) | 1 |
| Steering linkage insecure to the extent there is excessive movement at the mountings swing arm has free play (2.1.3 (a) (ii)) | 1 |
| Front Headlamp insecure (4.1.1 (c)) | 1 |
| Drive chain so loose it is likely to fail left chain tensioner plate failed, wheel moved forward (6.1.7 (c) (ii)) | 1 |
| Wheel alignment incorrect which adversely affects the steering rear wheel alignment (2.4 (a)) | 1 |
| Headlamp aim projected beam image obviously incorrect led bulb throws incorrect beam (4.1.2 (c)) | 1 |
| Drive chain horseshoe locking device incorrectly fitted clip wrong way round (6.1.7 (j) (i)) | 1 |
| Suspension attachment bracket/mounting insecure swing arm pivot bolt loose, causing swing arm bushes to appear worn, with excessive movement (5.3.3 (a) (i)) | 1 |
| Nearside Front Direction indicator light intensity significantly reduced (4.4.3 (a)) | 1 |
| Offside Front Direction indicator light intensity significantly reduced (4.4.3 (a)) | 1 |
| Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Fuel system component leaking fuel tap (6.1.3 (b) (i)) | 1 |
| Upper Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear wheel has a loose wheel nut|s| drive sprocket is loose |4.2.3a| | 1 |
| Footrest insecure can not be used |6.2.1a| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear position lamp missing |1.1.1a| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Front suspension assembly component missing |2.3.1| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Offside Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain link clip wrong way round |6.2.1h| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies front brake switch inop |1.3.1a| | 1 |
| Rear Rear suspension bush has excessive free play swing arm bushes |2.4.A2a|i|| | 1 |
| Suspension arm pin or bush excessively worn Swinging arm bush tightened (5.3.4 (a) (i)) | 1 |
| Rear suspension bush has excessive free play swing arm bushes |2.4.A2a|i|| | 1 |
| Rear Brake component has an inadequate repair brake arm fitted incorectly |3.1.5| | 1 |
| Stop lamp does not illuminate immediately a brake applies rear opperation |1.3.1a| | 1 |
| Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking all engine mounts |6.1.1c| | 1 |
| Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Front Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component possible fork brace |2.3.4| | 1 |
| Stop lamp not working Bulb (4.3.1 (a) (ii)) | 1 |
| Drive chain sprocket worn to excess both |6.2.1e| | 1 |
| Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Drive chain excessively tight, so that it is likely to fail |6.1.7 |k| |ii|| | 1 |
| Drive chain worn to excess tight links |6.1.7 |c| |i|| | 1 |
| Rear suspension bush has excessive free play swing arm |2.4.A2a|i|| | 1 |
| Headlamp aim not tested no low beam |1.6| | 1 |
| Front suspension assembly component excessively misaligned forks twisted? |2.3.1| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Stop lamp does not illuminate immediately a brake applies rear brake |1.3.1a| | 1 |
| Brake pedal cannot be applied smoothly hits exhaust |3.1.3d| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride rear sprocket bolts loose |6.2.1h| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Dipswitch does not operate immediately when selected on dipped beam headlamps working wrong way round on switch (4.1.3 (b)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Central Front Motorcycle structure is so deformed it is likely to adversely affect braking or steering front forks are both out of line with wheel and slightly twisted |6.1.1 |a| |ii|| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling front end twisted |2.4 |a|| | 1 |
| Rear Drive chain so worn it is likely to fail drive chain badly worn |6.1.7 |c| |ii|| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Rear Wheel hub excessively worn (5.2.1 (b) (i)) | 1 |
| Front Brake grabbing severely (1.2.1 (c)) | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies from rear pedal operation |1.3.1a| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking mudguard |6.1.1c| | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Central Rear Stop lamp not working Brake light N/W off front and rear Brake Light (4.3.1 (a) (ii)) | 1 |
| Central Front Steering headbearing has excessive wear or free play Head Bearings Have Excessive Play (2.2.2 (f) (i)) | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Rear Stop lamp not working from rear foot pedal lever (4.3.1 (a) (ii)) | 1 |
| Rear Motorcycle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Rear Footrest missing (6.2.12 (a)) | 1 |
| Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Rear Exhaust mounting missing |7.1.1c| | 1 |
| Front Handlebar mounting clamp loose |2.1.1a| | 1 |
| Registration plate issues | 1 |
| Front Front position lamp missing |1.1.1a| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| All position lamps not working (4.2.1 (a)) | 1 |
| Registration plate lamp issues | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Nearside Position lamp switch insecure |4.2.2 |b|| | 1 |
| Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Brake master cylinder severely corroded |3.2.B1b| | 1 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies brake light does not illuminate when rear brake pedal is pressed |1.3.1a| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride the horseshoe device on the drive chain is fitted with the open end in the direction of rotation. |6.2.1h| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Rear Suspension component pin or bush excessively worn swinging arm (5.3.4 (a) (i)) | 1 |
| Front Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Front Footrest insecure (6.2.12 (a)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
| Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Position lamp adversely affected by the operation of another lamp Affected by indicators (4.2.3 (b)) | 1 |
| Front Stop lamp adversely affected by the operation of another lamp Affected by indicators (4.3.3 (b)) | 1 |
| Headlamp light intensity severely reduced Affected by indicators (4.1.4 (a)) | 1 |
| Front Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Direction indicators flashing more than 120 times per minute all indicators |1.5.1c| | 1 |
| Offside Front Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Rear Direction indicator damaged and function impaired showing white light |1.5.3a| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Motorcycle structure excessively damaged mainstand bent down close to road |6.1.1a| | 1 |
| Front mudguard insecure cracked |2.3.7| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock turning left |2.1.4| | 1 |
| Brake locking device insecure split pin in rear rod |3.2.A1e| | 1 |
| Rear suspension bush has excessive free play swing arm centre bolt |2.4.A2a|i|| | 1 |
| Wheel alignment incorrect which adversely affects the steering rear to far right |2.5.1| | 1 |
| Front Brake master cylinder defective but brake still operating (1.1.10 (b) (i)) | 1 |
| Nearside Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
| Nearside Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Front Brake master cylinder leaking leaking from view window (1.1.10 (b) (ii)) | 1 |
| Front Brake fluid reservoir fluid not visible lens misted cracked and leaking (1.1.10 (d) (iii)) | 1 |
| Brake master cylinder leaking cylinder window delaminating allowing fluid through (1.1.10 (b) (ii)) | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Brake lever excessively worn (1.1.15 (b)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Rear Stop lamp not working From rear control (4.3.1 (a) (ii)) | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front suspension assembly component loose front forks loose and out of alinment |2.3.1| | 1 |
| Drive chain sprocket worn to excess bolts loose |6.2.1e| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
| Front Brake pipe inadequately supported brake hose insecure |3.2.B2b| | 1 |
| Drive chain sprocket so loose it is likely to fail cush drive. (6.1.7 (c) (ii)) | 1 |
| Rear Stop lamp not working hand. (4.3.1 (a) (ii)) | 1 |
| Rear Stop lamp not working foot. (4.3.1 (a) (ii)) | 1 |
| Drive chain sprocket so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Rear Drive chain sprocket excessively loose cush drive |6.1.7 |c| |i|| | 1 |
| Rear Exhaust is leaking and excessively noisey pipe |7.1.1b| | 1 |
| Rear suspension bush has excessive free play swinging arm |2.4.A2a|i|| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride SPROCKET bolts missing x2 |6.2.1h| | 1 |
| Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Brake pedal is inoperative |3.1.3c| | 1 |
| Front Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Chain guard insecure |6.2.1c| | 1 |
| Front Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
| Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Suspension component pin or bush excessively worn swing arm bush excessively worn |5.3.4 |a| |i|| | 1 |
| Front Drive chain excessively tight |6.2.1d| | 1 |
| Nearside Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Brake fluid reservoir fluid not visible |1.1.10 |d| |iii|| | 1 |
| Handlebar deformed to the extent that steering is affected |2.2.1 |c| |ii|| | 1 |
| Rear Rear suspension component loose swinging arm |2.4.A.1a| | 1 |
| Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Drive chain excessively tight |6.1.7 |k| |i|| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| Exhaust has a major leak of exhaust gases manifold |6.1.2 |a|| | 1 |
| Exhaust system insecure |6.1.2 |a|| | 1 |
| Steering headbearing has excessive wear or free play top bearing |2.2.2 |f| |i|| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies not working from back brake |1.3.1a| | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Footrest missing Rubber |6.2.1a| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Footrest insecure lower bolt missing |6.2.1a| | 1 |
| Front Brake fluid contaminated (1.8 (a)) | 1 |
| Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Headlamp aim not tested DUE TO NO PATTERN TO CHECK AND HEADLIGHT TILTED RIGHT UP (4.1.2 (b)) | 1 |
| Offside Stop lamp not working foot control (4.3.1 (a) (ii)) | 1 |
| Wheel alignment incorrect which adversely affects the steering between the front wheel and handle bars (2.4 (a)) | 1 |
| Front Position lamp missing (4.2.1 (a)) | 1 |
| Rear Position lamp adversely affected by the operation of another lamp by indicator (4.2.3 (b)) | 1 |
| Stop lamp adversely affected by the operation of another lamp by indicator (4.3.3 (b)) | 1 |
| Headlamp aim not tested due to no clear pattern to test (4.1.2 (b)) | 1 |
| Front shock absorber seal failed and leaking oil both front forks |2.3.3| | 1 |
| Exhaust has part of the system missing securing nut missing from manifold |7.1.1a| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Front position lamp insecure |1.1.1c| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Engine mounting/bracket damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i|| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Centre Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
| Direction indicator not working rear right hand not working and loose |1.5.1c| | 1 |
| Rear suspension bush has excessive free play swingarm |2.4.A2a|i|| | 1 |
| Footrest missing both rear footpegs missing |6.2.1a| | 1 |
| Motorcycle structure adversely modified mainstand not returning fully |6.1.1b| | 1 |
| Nearside Suspension arm pin or bush excessively worn swing arm (5.3.4 (a) (i)) | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies foot pedal |1.3.1a| | 1 |
| Engine mounting/bracket excessively loose (6.1.8 (a) (ii)) | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Rear Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
| Suspension arm ball joint excessively worn play in swing arm bushes |5.3.4 |a| |i|| | 1 |
| Rear Suspension arm pin or bush excessively worn swing arm bushes excess play |5.3.4 |a| |i|| | 1 |
| Rear Brake component insecure rear brake arm bolt loose |1.1.21 |c|| | 1 |
| Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Rear Drive chain sprocket so worn it is likely to fail wheel to far over, hitting the swingarm. Advise don,t ride until its been repaired!! (6.1.7 (c) (ii)) | 1 |
| Rear Wheel hub excessively worn Cush drive rubbers (5.2.1 (b) (i)) | 1 |