>

MOT History from tests of petrol SYM MIOs year 2008

Review the list of common SYM MIO failures below or to perform a specific mot history check on your SYM then use our popular KnowYourCar service

mot history
Pass percent:77.60%
(The average a petrol SYM MIO year 2008 passes without issue)
Based on:509 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment24
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|15
Rear reflector on motorcycle missing |1.4.1|12
Rear Brake lever has inadequate reserve travel |3.1.3b|10
Registration plate issues6
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|5
Stop lamp does not illuminate immediately a brake applies |1.3.1a|5
Front Brake lever cannot be applied smoothly |3.1.3d|5
Exhaust is leaking and excessively noisey |7.1.1b|4
Front wheel bearings have excessive free play |2.3.5b|4
Rear reflector missing (4.8.2 (a) (ii))3
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Steering headbearing has excessive free play |2.2.2|3
Rear reflector on motorcycle obscured |1.4.1|3
Front Roller brake test indicates a binding brake |3.3.A1a|3
Exhaust excessively deteriorated |7.1.1a|3
Brake lever has inadequate reserve travel |3.1.3b|2
Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Horn not working |1.7.3a|2
Rear Brake lever has insufficient reserve travel (1.1.2 (a))2
Headlamp aim headlamp deteriorated and function impaired |1.2.3a|2
Nearside Rear Direction indicator damaged and function impaired |1.5.3a|2
Direction indicators affected by the operation of another lamp |1.5.1c|2
Rear Roller brake test indicates a binding brake |3.3.A1a|2
Rear Stop lamp remains on when the brake is released |1.3.1e|2
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|2
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Front wheel bearings are excessively rough |2.3.5b|2
Front Brake excessively binding (1.2.1 (f))2
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c|2
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Fuel cap does not fasten securely by a positive means Stuck closed |7.2.2b|1
Rear Brake excessively binding (1.2.1 (f))1
Stop lamp remains on when the brakes are released1
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))1
Offside Brake has no recorded effort at a wheel Control 2 (1.2.1 (a) (ii))1
Front Front wheel bearings have excessive free play |2.3.5b|1
Offside Rear Direction indicator incorrect colour |1.5.1b|1
Headlamp insecure |1.2.3b|1
Front Brake disc|s| excessively scored |3.2.A1l|1
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Front Roller brake test indicates a sticking brake |3.3.A1a|1
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Offside Front Stop lamp not working |4.3.1 |a| |ii||1
Front Brake lever has inadequate reserve travel |3.1.3b|1
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Centre Rear Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Centre Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|1
Brake lever is inoperative |3.1.3c|1
Rear reflector on motorcycle incorrectly positioned |1.4.2d|1
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j|1
Offside Rear Direction indicator damaged and function impaired |1.5.3a|1
Handlebar deformed |2.1.1b|1
Front Exhaust is leaking and excessively noisey |7.1.1b|1
Steering headbearing has excessive wear or free play |2.2.2 |f| |i||1
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii||1
Rear Brake lever has insufficient reserve travel |1.1.2 |a||1
Front Brake disc significantly and obviously worn |1.1.14 |a| |i||1
Wheel alignment incorrect which adversely affects the steering |2.4 |a||1
Stop lamp not working |4.3.1 |a| |ii||1
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||1
Front Brake disc|s| cracked |3.2.A1g|1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Roller brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i))1
Headlamp aim not tested |1.6|1
Front Floor brake test indicates a severely grabbing brake |3.3.C2d|1
Central Rear Stop lamp not working front brake switch not working (4.3.1 (a) (ii))1
Offside Front Direction indicator not working (4.4.1 (a) (ii))1
Rear reflector missing |4.8.2 |a| |ii||1
Rear Valve stem seriously damaged |5.2.3 |j||1
Fuel cap sealing washer missing |7.2.2c|1
Nearside Stop lamp does not emit a steady light |1.3.1b|1
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))1
Headlamp not working on main beam (4.1.1 (a) (ii))1
Front Brake lever so insecure that the brake cannot be readily applied |1.1.2 |e| |ii||1
Front Wheel bearing has excessive play (5.1.3 (a) (i))1
Front Wheel bearing rough when rotated (5.1.3 (b) (i))1
Central Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))1
Front Direction indicators not working |1.5.1c|1
Rear Direction indicators not working |1.5.1c|1
Front Horn not working |1.7.3a|1
Headlamp light source and lamp not compatible led bulb fitted into halogen lamp (4.1.4 (c))1
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii))1
Offside Rear Direction indicator not working |1.5.1c|1
Rear Position lamp not working |4.2.1 |a||1
Headlamp damaged and function impaired |1.2.3a|1
Front Valve stem seriously damaged (5.2.3 (j))1
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Upper Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Lower Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Rear Position lamp not working (4.2.1 (a))1
Front Stop lamp not working (4.3.1 (a) (ii))1
Rear Rear reflector missing (4.8.2 (a) (ii))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy