| Most common failures | No# failures |
|---|
| Front Roller brake test indicates a binding brake |3.3.A1a| | 13 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 11 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 10 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 9 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Headlamp aim out of alignment | 5 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Direction indicators not working |1.5.1c| | 4 |
| Rear reflector on motorcycle missing |1.4.1| | 4 |
| Stop lamp remains on when the brake is released |1.3.1e| | 4 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 4 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Horn not working |1.7.3a| | 3 |
| Front Steering headbearing has excessive free play |2.2.2| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
| Steering headbearing has excessive free play |2.2.2| | 3 |
| Registration plate issues | 3 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Direction indicator not working |1.5.1c| | 2 |
| Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
| Rear Brake lever insecure |3.1.2a| | 2 |
| Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Nearside Front Headlamp damaged and function impaired |1.2.3a| | 2 |
| Offside Front Headlamp damaged and function impaired |1.2.3a| | 2 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Rear wheel has a loose wheel stud|s| |4.2.3a| | 1 |
| Direction indicator insecure |1.5.3b| | 1 |
| Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Rear Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Front Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
| Offside Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Centre Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Brake lever pivots excessively worn |3.1.3a| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Offside Direction indicators not working |1.5.1c| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Offside Suspension component attachment bracket/mounting corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
| Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| An item not tested |Manual| | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Front Horn control defective |1.7.2a| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Nearside Rear Rear position lamp insecure |1.1.1c| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded caliper binding excessively |3.2.A1h| | 1 |
| Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Direction indicators flashing more than 120 times per minute front and rear |1.5.1c| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| All position lamps do not illuminate immediately when switched on no working lights |1.1.3a| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |