MOT History from tests of petrol SYM JETs year 2000

Review the list of common SYM JET failures below or to perform a specific mot history check on your SYM then use our popular KnowYourCar service

mot history

Pass percent:75.50%

(The average a petrol SYM JET year 2000 passes without issue)

Based on:2,188 MOT Tests

Most common failures	No# failures
Steering headbearing has excessive free play \|2.2.2\|	60
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	58
Exhaust is leaking and excessively noisey \|7.1.1b\|	55
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	51
Headlamp aim out of alignment	38
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	28
Registration plate issues	26
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	24
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	18
Front Stop lamp remains on when the brake is released \|1.3.1e\|	17
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	15
Throttle operating incorrectly \|6.2.1f\|	14
Riders seat insecure \|6.2.1a\|	13
Stop lamp remains on when the brake is released \|1.3.1e\|	13
Front Steering headbearing has excessive free play \|2.2.2\|	13
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	12
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	10
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	10
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	10
Exhaust excessively deteriorated \|7.1.1a\|	10
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	9
Front wheel bearings are excessively rough \|2.3.5b\|	9
Horn not working \|1.7.3a\|	9
Rear reflector on motorcycle missing \|1.4.1\|	9
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	9
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	9
Front wheel bearings have excessive free play \|2.3.5b\|	8
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	8
Front Roller brake test indicates a binding brake \|3.3.A1a\|	8
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	7
Rear Brake lever insecure \|3.1.2a\|	7
Rear Rear reflector on motorcycle missing \|1.4.1\|	7
Horn not loud enough to be heard by another road user \|1.7.3a\|	7
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	6
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	6
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	6
Brake lever has inadequate reserve travel \|3.1.3b\|	6
Nearside Rear Direction indicator insecure \|1.5.3b\|	6
Offside Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	5
Nearside Brake lever has inadequate reserve travel \|3.1.3b\|	5
Front Floor brake test indicates a binding brake \|3.3.C2c\|	5
Rear Brake lever mounting insecure \|3.1.2a\|	5
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	5
Nearside Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	5
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	5
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	5
Headlamp not working on dipped beam (4.1.1 (a) (ii))	5
Nearside Front Brake lever has inadequate reserve travel \|3.1.3b\|	4
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	4
Rear wheel rotation likely to be impeded \|6.2.1b\|	4
Headlamp insecure \|1.2.3b\|	4
Nearside Rear Direction indicator not working \|1.5.1c\|	4
Vehicle identification number not permanently displayed \|6.3.5a\|	4
Rear Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	4
Nearside Front Direction indicator incorrect colour \|1.5.1b\|	4
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	4
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	4
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	4
Headlamp aim beam image kick up to the offside \|1.6\|	4
Nearside Front Direction indicator damaged and function impaired \|1.5.3a\|	4
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	4
Nearside Front Direction indicator not working \|1.5.1c\|	4
Indicator switch defective \|1.5.4\|	4
Front Front wheel bearings are excessively rough \|2.3.5b\|	4
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))	4
Front Horn not working \|1.7.3a\|	3
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	3
Front All position lamps do not illuminate immediately when switched on \|1.1.3a\|	3
Offside Rear Direction indicator not working \|1.5.1c\|	3
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	3
Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	3
Front Direction indicator not working \|1.5.1c\|	3
An item not tested \|Manual\|	3
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	3
Nearside Brake lever insecure \|3.1.2a\|	3
Fairings insecure and likely to impede the steering \|2.1.2e\|	3
Rear Direction indicator not working \|1.5.1c\|	3
Exhaust mounting missing \|7.1.1c\|	3
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	3
Rear Brake lever pivots excessively worn \|3.1.3a\|	3
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	3
Front suspension assembly component excessively bent \|2.3.1\|	3
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	3
Horn sounds harsh or grating \|1.7.3c\|	3
Front Front suspension has inadequate damping effect. \|2.3.6c\|	3
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	3
Offside Exhaust is leaking and excessively noisey \|7.1.1b\|	3
Front Front wheel bearings have excessive free play \|2.3.5b\|	3
Nearside Rear Direction indicator incorrect colour \|1.5.1b\|	3
Front Brake disc\|s\| is excessively distorted \|3.2.A1m\|	3
Offside Rear Direction indicator missing \|1.5.1a\|	3
Offside Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	3
Direction indicators not working \|1.5.1c\|	3
Headlamp main beam affected by the operation of another lamp \|1.2.2c\|	3
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	3
Rear suspension movement is excessively stiff \|2.4.A.3b\|	3
Direction indicators affected by the operation of another lamp \|1.5.1c\|	3
Centre Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Horn control defective \|1.7.2a\|	3
Front Roller brake test indicates a severely juddering brake \|3.3.A1b\|	3
Front Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	3
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii))	3
Nearside Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	2
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	2
Rear Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	2
Front Headlamp aim not tested \|1.6\|	2
Nearside Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
All position lamps do not illuminate immediately when switched on \|1.1.3a\|	2
Offside Rear Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	2
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	2
Offside Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	2
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	2
Nearside Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	2
Offside Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	2
Rear Brake lever cannot be applied smoothly \|3.1.3d\|	2
Floor brake test No brake control achieves an efficiency of 30%. \|3.3.C1a\|	2
Nearside Front Direction indicators not working \|1.5.1c\|	2
Offside Direction indicator not working \|1.5.1c\|	2
Rear An item not tested \|Manual\|	2
Front Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	2
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	2
Front Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	2
Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Front Headlamp insecure \|1.2.3b\|	2
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	2
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	2
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	2
Rear Brake linkage excessively corroded \|3.2.A1c\|	2
Front Exhaust mounting missing \|7.1.1c\|	2
Offside Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front Fairings insecure and likely to impede the steering \|2.1.2e\|	2
Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Nearside Front Front wheel bearings have excessive free play \|2.3.5b\|	2
Offside Front Front wheel bearings have excessive free play \|2.3.5b\|	2
Headlamp aim not tested \|1.6\|	2
Offside Front Direction indicator insecure \|1.5.3b\|	2
Offside Rear Direction indicator insecure \|1.5.3b\|	2
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Stop lamp affected by the operation of another lamp \|1.3.2\|	2
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2
Nearside Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Offside Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front Direction indicators not working \|1.5.1c\|	2
Horn is not a constant note \|1.7.3c\|	2
Rear Direction indicators not working \|1.5.1c\|	2
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Nearside Front Brake lever pivots excessively worn \|3.1.3a\|	2
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	2
Front position lamp incorrect colour \|1.1.2a\|	2
Rear Riders seat insecure \|6.2.1a\|	2
Offside Front Direction indicator not working \|1.5.1c\|	2
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Fuel system component leaking \|7.2.1a\|	2
Nearside Direction indicator flashing less than 60 times a minute \|1.5.1c\|	2
Rear Brake lever has insufficient reserve travel (1.1.2 (a))	2
Headlamp aim not tested (4.1.2 (b))	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Steering headbearing has excessive free play \|2.2.2\|	60
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	58
Exhaust is leaking and excessively noisey \|7.1.1b\|	55
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	51
Headlamp aim out of alignment	38
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	28
Registration plate issues	26
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	24
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	18
Front Stop lamp remains on when the brake is released \|1.3.1e\|	17
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	15
Throttle operating incorrectly \|6.2.1f\|	14
Riders seat insecure \|6.2.1a\|	13
Stop lamp remains on when the brake is released \|1.3.1e\|	13
Front Steering headbearing has excessive free play \|2.2.2\|	13
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	12
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	10
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	10
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	10
Exhaust excessively deteriorated \|7.1.1a\|	10
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	9
Front wheel bearings are excessively rough \|2.3.5b\|	9
Horn not working \|1.7.3a\|	9
Rear reflector on motorcycle missing \|1.4.1\|	9
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	9
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	9
Front wheel bearings have excessive free play \|2.3.5b\|	8
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	8
Front Roller brake test indicates a binding brake \|3.3.A1a\|	8
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	7
Rear Brake lever insecure \|3.1.2a\|	7
Rear Rear reflector on motorcycle missing \|1.4.1\|	7
Horn not loud enough to be heard by another road user \|1.7.3a\|	7
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	6
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	6
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	6
Brake lever has inadequate reserve travel \|3.1.3b\|	6
Nearside Rear Direction indicator insecure \|1.5.3b\|	6
Offside Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	5
Nearside Brake lever has inadequate reserve travel \|3.1.3b\|	5
Front Floor brake test indicates a binding brake \|3.3.C2c\|	5
Rear Brake lever mounting insecure \|3.1.2a\|	5
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	5
Nearside Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	5
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	5
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	5
Headlamp not working on dipped beam (4.1.1 (a) (ii))	5
Nearside Front Brake lever has inadequate reserve travel \|3.1.3b\|	4
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	4
Rear wheel rotation likely to be impeded \|6.2.1b\|	4
Headlamp insecure \|1.2.3b\|	4
Nearside Rear Direction indicator not working \|1.5.1c\|	4
Vehicle identification number not permanently displayed \|6.3.5a\|	4
Rear Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	4
Nearside Front Direction indicator incorrect colour \|1.5.1b\|	4
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	4
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	4
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	4
Headlamp aim beam image kick up to the offside \|1.6\|	4
Nearside Front Direction indicator damaged and function impaired \|1.5.3a\|	4
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	4
Nearside Front Direction indicator not working \|1.5.1c\|	4
Indicator switch defective \|1.5.4\|	4
Front Front wheel bearings are excessively rough \|2.3.5b\|	4
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))	4
Front Horn not working \|1.7.3a\|	3
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	3
Front All position lamps do not illuminate immediately when switched on \|1.1.3a\|	3
Offside Rear Direction indicator not working \|1.5.1c\|	3
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	3
Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	3
Front Direction indicator not working \|1.5.1c\|	3
An item not tested \|Manual\|	3
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	3
Nearside Brake lever insecure \|3.1.2a\|	3
Fairings insecure and likely to impede the steering \|2.1.2e\|	3
Rear Direction indicator not working \|1.5.1c\|	3
Exhaust mounting missing \|7.1.1c\|	3
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	3
Rear Brake lever pivots excessively worn \|3.1.3a\|	3
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	3
Front suspension assembly component excessively bent \|2.3.1\|	3
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	3
Horn sounds harsh or grating \|1.7.3c\|	3
Front Front suspension has inadequate damping effect. \|2.3.6c\|	3
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	3
Offside Exhaust is leaking and excessively noisey \|7.1.1b\|	3
Front Front wheel bearings have excessive free play \|2.3.5b\|	3
Nearside Rear Direction indicator incorrect colour \|1.5.1b\|	3
Front Brake disc\|s\| is excessively distorted \|3.2.A1m\|	3
Offside Rear Direction indicator missing \|1.5.1a\|	3
Offside Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	3
Direction indicators not working \|1.5.1c\|	3
Headlamp main beam affected by the operation of another lamp \|1.2.2c\|	3
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	3
Rear suspension movement is excessively stiff \|2.4.A.3b\|	3
Direction indicators affected by the operation of another lamp \|1.5.1c\|	3
Centre Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Horn control defective \|1.7.2a\|	3
Front Roller brake test indicates a severely juddering brake \|3.3.A1b\|	3
Front Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	3
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii))	3
Nearside Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	2
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	2
Rear Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	2
Front Headlamp aim not tested \|1.6\|	2
Nearside Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
All position lamps do not illuminate immediately when switched on \|1.1.3a\|	2
Offside Rear Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	2
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	2
Offside Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	2
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	2
Nearside Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	2
Offside Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	2
Rear Brake lever cannot be applied smoothly \|3.1.3d\|	2
Floor brake test No brake control achieves an efficiency of 30%. \|3.3.C1a\|	2
Nearside Front Direction indicators not working \|1.5.1c\|	2
Offside Direction indicator not working \|1.5.1c\|	2
Rear An item not tested \|Manual\|	2
Front Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	2
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	2
Front Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	2
Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Front Headlamp insecure \|1.2.3b\|	2
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	2
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	2
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	2
Rear Brake linkage excessively corroded \|3.2.A1c\|	2
Front Exhaust mounting missing \|7.1.1c\|	2
Offside Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front Fairings insecure and likely to impede the steering \|2.1.2e\|	2
Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Nearside Front Front wheel bearings have excessive free play \|2.3.5b\|	2
Offside Front Front wheel bearings have excessive free play \|2.3.5b\|	2
Headlamp aim not tested \|1.6\|	2
Offside Front Direction indicator insecure \|1.5.3b\|	2
Offside Rear Direction indicator insecure \|1.5.3b\|	2
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Stop lamp affected by the operation of another lamp \|1.3.2\|	2
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2
Nearside Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Offside Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front Direction indicators not working \|1.5.1c\|	2
Horn is not a constant note \|1.7.3c\|	2
Rear Direction indicators not working \|1.5.1c\|	2
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Nearside Front Brake lever pivots excessively worn \|3.1.3a\|	2
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	2
Front position lamp incorrect colour \|1.1.2a\|	2
Rear Riders seat insecure \|6.2.1a\|	2
Offside Front Direction indicator not working \|1.5.1c\|	2
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Fuel system component leaking \|7.2.1a\|	2
Nearside Direction indicator flashing less than 60 times a minute \|1.5.1c\|	2
Rear Brake lever has insufficient reserve travel (1.1.2 (a))	2
Headlamp aim not tested (4.1.2 (b))	2

MOT History from tests of petrol SYM JETs year 2000

Find us on Facebook