| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 15 |
| Drive chain excessively loose |6.2.1d| | 9 |
| Drive chain worn to excess |6.2.1e| | 6 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Rear reflector on motorcycle missing |1.4.1| | 6 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 4 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Registration plate issues | 4 |
| Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Steering headbearing has excessive free play |2.2.2| | 4 |
| Rear Brake pedal insecure |3.1.2a| | 3 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Offside Rear Direction indicator not working |1.5.1c| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Horn not working |1.7.3a| | 3 |
| Rear reflector on motorcycle obscured |1.4.1| | 3 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Rear Wheel spoke missing |4.2.1b| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Fuel system component leaking |7.2.1a| | 2 |
| Rear Wheel spoke cracked. |4.2.1b| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Front Footrest insecure |6.2.1a| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Seat insecure |6.2.1a| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Nearside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride engine mounting bols missing |6.2.1h| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
| Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Front suspension assembly component excessively bent |2.3.1| | 1 |
| Brake back plate|s| insecure Fitted split pin |3.2.A1j| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
| Rear Lower Brake component insecure torque arm |1.1.21 |c|| | 1 |
| Rear Wheel spoke cracked broken (5.2.2 (d)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Front Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
| Rear Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced swinging arm (6.1.1 (c) (i)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Brake lever mounting insecure |3.1.2a| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Direction indicator insecure |1.5.3b| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Front Motorcycle structure excessively damaged mudguard |6.1.1a| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Front Direction indicator obviously incorrectly positioned to close together , min is 240mm (4.4.3 (a)) | 1 |
| Stop lamp does not illuminate immediately a brake applies front brake lever |1.3.1a| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Centre Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Offside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Offside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Headlamp light source and lamp not compatible LED bulb fitted (4.1.4 (c)) | 1 |
| Headlamp lens seriously defective No image (4.1.1 (b) (ii)) | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Nearside Footrest insecure (6.2.12 (a)) | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Brake fluid reservoir fluid level significantly below minimum level |1.1.10 |d| |ii|| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Wheel spindle or securing nut|s| so insecure that wheel security or steering control is adversely affected rear nut |5.2.1 |c| |ii|| | 1 |
| Direction indicators not working ALL 4 |1.5.1c| | 1 |
| Headlamp aim not tested NOT WORKING |1.6| | 1 |
| Stop lamp does not illuminate immediately a brake applies NOT WORKING |1.3.1a| | 1 |
| Offside Front Shock absorber has a serious fluid leak Fork Seal (5.3.2 (b)) | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |