Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Registration plate lamp issues | 7 |
Brake pipe excessively corroded | 4 |
Windscreen wiper does not clear the windscreen effectively | 4 |
Registration plate issues | 3 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Rear fog lamp not working |1.3.2b| | 2 |
Front Headlamp not working on dipped beam |1.7.5a| | 2 |
Offside Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Nearside Side repeater missing |1.4.A.2b| | 1 |
Offside Side repeater missing |1.4.A.2b| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Front Outer Obligatory mirror missing |8.1.1| | 1 |
Centre Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 1 |
Nearside Rear Direction indicator excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Rear Body mounting fixings insecure such that stability is seriously impaired (6.2.2 (c) (ii)) | 1 |
Offside Front Body mounting fixings insecure (6.2.2 (c) (i)) | 1 |
Offside Rear Floor excessively deteriorated midsection (6.2.4 (a) (i)) | 1 |
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner cill not attached (6.1.1 (c) (i)) | 1 |
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner cill not attached (6.1.1 (c) (i)) | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheelarch (6.1.1 (c) (i)) | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced general all over structural (6.1.1 (c) (i)) | 1 |
Offside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Rear Brake valve leaking |3.6.A.1| | 1 |
Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 1 |
Seat belt anchorage prescribed area strength or continuity significantly reduced both sills and floor (7.1.1 (a) (i)) | 1 |
Body mounting fixings insecure such that stability is seriously impaired all mountings both sides corroded (6.2.2 (c) (ii)) | 1 |
Body mounting fixings insecure all (6.2.2 (c) (i)) | 1 |
Bonnet cannot be secured in the closed position (3.1 (b) (i)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Windscreen has damage | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |
Nearside Rear fog lamp emits a light other than red |1.3.2e| | 1 |
Rear fog lamp switch missing |1.3.1a| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Outer Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Front Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 1 |
Nearside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
All position lamps not working |1.1.A.3b| | 1 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Obligatory mirror missing |8.1.1| | 1 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
Nearside Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Brakes imbalanced across an axle | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Nearside Front Steering pivot point has excessive play |2.2.B.1g| | 1 |
Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |