Most common failures | No# failures |
---|
Headlamp aim out of alignment | 16 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Horn not working |1.7.3a| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Rear parking brake recording little or no effort | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Registration plate issues | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Offside Front Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Brake hose excessively deteriorated | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Offside Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Nearside Front Brake disc|s| insecure |3.2.A1g| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Centre Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Brake caliper leaking (1.1.16 (b) (i)) | 1 |
Rear Shock absorber insecurely attached both (5.3.2 (a) (i)) | 1 |
Front Stop lamp emits other than a steady red light (4.3.3 (a) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Brake component has an inadequate repair |3.1.5| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Wheel spindle loose pinch bolt insecure |5.2.1 |c| |i|| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Registration plate lamp issues | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Footrest insecure |6.2.1a| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front position lamp does not face the front |1.1.1d| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |