Most common failures | No# failures |
---|
Headlamp aim out of alignment | 30 |
Registration plate issues | 9 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Handlebar deformed |2.1.1b| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Horn not working |1.7.3a| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Registration plate lamp issues | 2 |
Direction indicators not working |1.5.1c| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Rear Brake excessively binding |1.2.1 |f|| | 2 |
Front Wheel damaged significantly reducing the original strength |4.2.1a| | 1 |
Offside Rear Rear suspension component loose |2.4.A.1a| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Fuel system component leaking excessively or a risk of fire Fuel leaking excessively from vacuum fuel pump unit above rear swinging arm (6.1.3 (b) (ii)) | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
An item not tested |Manual| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Rear Brake pedal attachment screws loose master cylinder |3.1.2b| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Brake pedal pivots excessively worn |3.1.3a| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Brake hose leaking (1.1.12 (c)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
All direction indicators missing |4.4.1 |a| |ii|| | 1 |
Stop lamp does not illuminate immediately a brake applies front control |1.3.1a| | 1 |
Offside Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Nearside Axle beam cracked |2.5.A.5a| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Nearside Front Front position lamp|s| missing |1.1.A.3a| | 1 |
Offside Front Front position lamp|s| missing |1.1.A.3a| | 1 |
Nearside Rear Front position lamp|s| missing |1.1.A.3a| | 1 |
Offside Rear Front position lamp|s| missing |1.1.A.3a| | 1 |
Nearside Front Direction indicator missing |1.4.A.2b| | 1 |
Offside Front Direction indicator missing |1.4.A.2b| | 1 |
Offside Rear Direction indicator missing |1.4.A.2b| | 1 |
Nearside Rear Direction indicator missing |1.4.A.2b| | 1 |
Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Front Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies front switch |1.3.1a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Stop lamp missing |1.3.3a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Brake component inadequately mounted brake flexi hose insecure |1.1.21 |c|| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Offside Handlebar handgrip missing |2.1.1c| | 1 |
Fuel hose leaking (6.1.3 (b) (i)) | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
Nearside Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Offside Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Rear Motorcycle structure joining/attachment plate or fastening insecure split pin missing from torque arm nut |6.1.1 |b| |i|| | 1 |