Most common failures | No# failures |
---|
Headlamp aim out of alignment | 6 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Registration plate issues | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Horn not working |1.7.3a| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Front Footrest missing |6.2.1a| | 1 |
Hazard warning switch inoperative missing (4.4.2 (a) (ii)) | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Front Indicator tell tale not operating correctly |1.5.2| | 1 |
Offside Front Indicator tell tale not operating correctly |1.5.2| | 1 |
Nearside Rear Indicator tell tale not operating correctly |1.5.2| | 1 |
Offside Rear Indicator tell tale not operating correctly |1.5.2| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Trikes, quads or pre-68 vehicles, service brake efficiency below requirements |3.7.B.7| | 1 |
Brakes imbalanced across an axle | 1 |
Nearside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Indicator tell tale not operating correctly |1.5.2| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Hazard warning switch missing |1.4.B.1d| | 1 |
Stop lamp(s) all not working when front brake applied (4.3.1 (a) (iii)) | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Central Fuel hose leaking (6.1.3 (b) (i)) | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Rear Road wheel fixing loose (5.2.1 (a) (i)) | 1 |
Offside Rear Direction indicator adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
Front Stop lamp|s| not working lever |4.3.1 |a| |ii|| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Front Stop lamp not working lever |1.2.1b| | 1 |
Nearside Rear reflector missing |1.5.1a| | 1 |
Parking brake efficiency below requirements |3.7.B.7| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Brake cable insecure broke on test |3.5.1d| | 1 |
Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Registration plate lamp issues | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Front Brake caliper insecurely mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
Front Brake component is severely distorted |3.1.5| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Throttle operating incorrectly sticks on right hand lock |6.2.1f| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Brake master cylinder insecurely mounted |3.2.B1a| | 1 |