| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 16 |
| Registration plate issues | 12 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Centre Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
| Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Lower Exhaust system insecure |6.1.2 |a|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Headlamp incorrect colour |1.2.1| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Brake hose leaking on a hydraulic braking system |1.1.12 |c| |ii|| | 1 |
| Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
| Parking brake lever insecure |3.1.3b| | 1 |
| Nearside Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Offside Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
| Parking brake lever inoperative (1.1.6 (d)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen Wrong side kickup |4.1.2 |a|| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Brake pedal anti-slip provision missing |3.3.A.1b| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Rear parking brake recording little or no effort | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride footrest |6.2.1h| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition rear silencer box deteriorated and excessively leaking. |7.1.2| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Nearside Front Outer Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Front Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Horn not working |1.7.3a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Front Position lamp not working front side light not working - PRS - replace bulb (4.2.1 (a)) | 1 |
| Rear Position lamp not working rear position light not working - PRS - replace bulb (4.2.1 (a)) | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Brake hose damaged | 1 |
| Headlamp aim projected beam image obviously incorrect dips wrong way (4.1.2 (c)) | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Offside Rear Hydraulic brake calliper insecurely mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
| Front Headlamp not working on main beam |1.7.5a| | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Rear Motorcycle structure modified such that structural rigidity is significantly reduced Rear Mudguard Insecure (6.1.1 (d) (i)) | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Rear Brake lever pivot excessively tight |1.1.1 |a|| | 1 |
| Stop lamp does not illuminate immediately a brake applies Rear brake switch spring missing |1.3.1a| | 1 |
| Rear Roller brake test indicates a sticking brake (3.3.A1a) | 1 |