Most common failures | No# failures |
---|
Registration plate issues | 21 |
Headlamp aim out of alignment | 15 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Rear reflector on motorcycle missing |1.4.1| | 10 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 9 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 6 |
Front wheel bearings are excessively rough |2.3.5b| | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Horn not working |1.7.3a| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake disc|s| insecure |3.2.A1g| | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Brake component is severely distorted |3.1.5| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Exhaust is leaking and excessively noisey exhaust blow is heating fuel tank |7.1.1b| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Handlebar mounting clamp bolt loose Both Clamps |2.1.1a| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Offside Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Registration plate lamp issues | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Brake hose damaged | 1 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Stop lamp not working on rear control (4.3.1 (a) (ii)) | 1 |
Motorcycle structure joining/attachment plate or fastening insecure battery (6.1.1 (b) (i)) | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Hazard warning lamps not fitted |1.4.B.1a| | 1 |
Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Offside Rear reflector missing |1.5.1a| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
Rear Brake cable locking device insecure |3.5.1l| | 1 |
Centre Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Centre Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Brake pedal has inadequate reserve travel rear |3.1.3b| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Offside Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Steering headbearing in such a condition that steering control is adversely affected headstock bearing excessively worn. (2.2.2 (f) (ii)) | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Front Brake lever cracked |3.1.2c| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Throttle operating incorrectly sticking on lock |6.2.1f| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Horn emits 2 or more alternating tones |1.7.3b| | 1 |
Stop lamp not working foot brake (4.3.1 (a) (ii)) | 1 |
Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 1 |
Nearside Stop lamp emits other than a steady red light |1.2.1e| | 1 |
Offside Stop lamp emits other than a steady red light |1.2.1e| | 1 |
Front front brake binding |3.7.B.1| | 1 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Lower Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |