Most common failures | No# failures |
---|
Headlamp aim out of alignment | 28 |
Registration plate issues | 11 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Position lamp not working (4.2.1 (a)) | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Stop lamp remains on when the brakes are released | 2 |
Rear Brake pedal anti-slip provision missing (1.1.2 (c)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Horn not working |1.7.3a| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Brake lever has insufficient reserve travel poor efert (1.1.2 (a)) | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Handlebar excessively deformed Handlebars bent on left side (2.2.1 (c) (i)) | 1 |
Wheel bearing rough when rotated Front wheel (5.1.3 (b) (i)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Drive chain sprocket excessively loose Cush drive rubbers worn (6.1.7 (c) (i)) | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Brake hose excessively twisted (1.1.12 (b) (ii)) | 1 |
Front Brake component inadequately mounted pipe (1.1.21 (c)) | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Central Front Position lamp not working (4.2.1 (a)) | 1 |
Offside Rear Lower Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Brake linkage has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Offside Front Footrest insecure (6.2.12 (a)) | 1 |
Central Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Motorcycle structure joining/attachment plate or fastening insecure mudguard (6.1.1 (b) (i)) | 1 |
Central Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Central Rear Position lamp not working (4.2.1 (a)) | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Registration plate lamp issues | 1 |
Front Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
Front Brake fluid contaminated (1.8 (a)) | 1 |
Offside Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Direction indicator insecure |1.5.3b| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake hydraulic reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
Horn sounds harsh or grating |1.6.2e| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Horn not working |1.6.2a| | 1 |
Stop lamp does not illuminate immediately a brake applies Front switch |1.3.1a| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |