Most common failures | No# failures |
---|
Headlamp aim out of alignment | 10 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Roller brake test indicates a binding brake Rear |3.3.A1a| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Exhaust silencer likely to become detached |8.1.1 |b| |ii|| | 1 |
Engine mounting/bracket damaged or deteriorated resulting in excessive movement stand |6.1.8 |a| |i|| | 1 |
Front Brake grabbing severely |1.2.1 |c|| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Stop lamp remains on when the brake is released front brake |1.3.1e| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Offside Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Handlebar handgrip not secure to handlebars. L/H |2.1.1c| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Motorcycle structure joining/attachment plate or fastening insecure centrer stand insure broken on weld |6.1.1 |b| |i|| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Horn not working |1.7.3a| | 1 |
Rear Brake grabbing severely rear brake grabs |1.2.1 |c|| | 1 |
Rear Fuel cap ineffective fuel cap seal missing |6.1.3 |b| |i|| | 1 |
Central Front Brake excessively binding front brake bind |1.2.1 |f|| | 1 |
Rear Brake excessively binding rear brake bind |1.2.1 |f|| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Fork yoke in such a condition that steering control is adversely affected |2.2.2 |d| |ii|| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Horn not working (7.7 (a)) | 1 |
Stop lamp remains on when the brakes are released | 1 |