Most common failures | No# failures |
---|
Headlamp aim out of alignment | 9 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Registration plate issues | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Offside Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake caliper insecurely mounted and braking performance affected pad retention pin clip missing |1.1.16 |c| |ii|| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort 25 kgf deflection |3.3.A1d| | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear reflector defective or damaged by more than 50% of the reflecting surface |4.8.1 |a| |ii|| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Suspension component attachment bracket/mounting likely to fail support arm mounting bolt missing |5.3.3 |b| |ii|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Motorcycle structure is fractured and structural rigidity is significantly reduced front mudgaurd broken and sharp edges , not bracing front forks (6.1.1 (a) (i)) | 1 |
Central Front Lower Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced Frame (6.1.1 (c) (i)) | 1 |
Motorcycle structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Brake grabbing severely rear lever cannot be applied smoothly (1.2.1 (c)) | 1 |
Stop lamp not working rear lever switch (4.3.1 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Stop lamp remains on when the brakes are released | 1 |