Most common failures | No# failures |
---|
Headlamp aim out of alignment | 22 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 4 |
Horn not working |1.7.3a| | 3 |
Registration plate issues | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Centre Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Centre Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust mounting missing supporting bolt |7.1.1c| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies front lever |1.3.1a| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Brake performance not tested |3.3| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Vehicle identification number not legible |6.3.5a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front shock absorber seal failed and leaking oil Leaking fork seals |2.3.3| | 1 |
Nearside Indicator tell tale not functioning |1.5.2| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Centre Front Lower Brake disc|s| cracked |3.2.A1g| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Vehicle identification number not legible |6.3.5a| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Brake lever is so short that the brake cannot be readily applied |1.1.2 |d|| | 1 |
Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
Nearside Direction indicator not working both left front and rear indicators repaired (4.4.1 (a) (ii)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Exhaust system insecure Mounting bolt missing (6.1.2 (a)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Throttle control functioning such that safe operation of the motorcycle is adversely affected lock to lock not safe, freed cable and adjusted. (6.2.7 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Brake disc contaminated (1.1.14 (b)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |