| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 9 |
| Horn not working |1.7.3a| | 9 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 4 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Registration plate lamp issues | 3 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 2 |
| Registration plate issues | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
| Offside Front Brake lever is positioned so that the brake cannot be readily applied |1.1.2 |d|| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Vehicle identification number not permanently displayed |6.3.5a| | 1 |
| Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Lower Brake cylinder severely corroded |3.2.B1b| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Gradient brake test indicates a binding brake |3.3.D1c| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Decelerometer brake test the less effective brake control does not achieve an efficiency of 25%. |3.3.E1b| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Nearside Brake cable badly frayed |3.2.A1b| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| All position lamps not working Front and rear turn off when dipped beam is switched to on (4.2.1 (a)) | 1 |