| Most common failures | No# failures |
|---|
| Rear reflector on motorcycle missing |1.4.1| | 55 |
| Headlamp aim out of alignment | 38 |
| Registration plate issues | 28 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
| Fuel cap sealing washer missing |7.2.2c| | 13 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 13 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
| Horn not working |1.7.3a| | 12 |
| Drive chain worn to excess |6.2.1e| | 12 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 11 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Drive chain excessively loose |6.2.1d| | 10 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 10 |
| Steering headbearing has excessive free play |2.2.2| | 10 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 10 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 9 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 9 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 9 |
| Front wheel bearings are excessively rough |2.3.5b| | 8 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 8 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 7 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
| Brake lever has inadequate reserve travel |3.1.3b| | 7 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 6 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 6 |
| Brake locking device missing |3.2.A1e| | 6 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 6 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 6 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 5 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 5 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
| Front wheel bearings have excessive free play |2.3.5b| | 5 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 4 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 4 |
| Drive chain excessively tight |6.2.1d| | 4 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 4 |
| Nearside Front Direction indicator not working |1.5.1c| | 4 |
| Nearside Rear Footrest missing |6.2.1a| | 4 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
| Rear Wheel spoke excessively loose |4.2.1b| | 4 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 3 |
| Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 3 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Front Handlebar deformed |2.1.1b| | 3 |
| Steering movement excessively rough with the wheel raised |2.2.1b| | 3 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 3 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Offside Front Direction indicator not working |1.5.1c| | 3 |
| Handlebar deformed |2.1.1b| | 3 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Direction indicators not working |1.5.1c| | 3 |
| Front Wheel spoke excessively loose |4.2.1b| | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 2 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 2 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Inner Rear Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Headlamp aim not tested |1.6| | 2 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Rear position lamp insecure |1.1.1c| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Rear Brake lining|s| less than 1.0 mm thick |1.1.13 |a|| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear Brake locking device missing |3.2.A1e| | 2 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Offside Rear Footrest missing |6.2.1a| | 2 |
| Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 2 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front Brake excessively binding (1.2.1 (f)) | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Front Brake grabbing severely (1.2.1 (c)) | 1 |
| Fuel cap leaking |6.1.3 |b| |i|| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Drive chain excessively tight |6.1.7 |k| |i|| | 1 |
| Handlebar excessively deformed |2.2.1 |c| |i|| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam Front and rear lamps not working effectivley |Very dim| |1.2.2a|i|| | 1 |
| Horn not working Horn not working |1.7.3a| | 1 |
| Stop lamp does not illuminate immediately a brake applies Stop lamp not working |1.3.1a| | 1 |
| Rear Rear reflector on motorcycle missing Rear reflector missing |1.4.1| | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Front Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Rear Suspension arm modified so the suspension is inoperative NOT MODIFIED,. But partially seized and sticking down. (5.3.3 (c) (ii)) | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Offside Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Position lamp switch does not operate the front and rear position lamps |1.1.4c| | 1 |
| Front Lower Brake cable has restricted free movement Brake arm |1.1.15 |e|| | 1 |
| Rear Brake grabbing severely |1.2.1 |c|| | 1 |
| Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
| Offside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Brake cable badly frayed |3.2.A1b| | 1 |
| Brake cable has a significantly damaged outer casing. |3.2.A1b| | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Nearside Rear Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Rear Direction indicator missing |1.5.1a| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Centre Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Centre Rear reflector on motorcycle obscured |1.4.2b| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
| Front Valve stem seriously misaligned (5.2.3 (j)) | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain link |6.2.1h| | 1 |
| Rear Front mudguard insecure |2.3.7| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Rear Rear suspension component loose |2.4.A.1a| | 1 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Front Brake locking device insecure |3.2.A1e| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Inner Front Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Rear Footrest insecure pillion footrest locking device missing |6.2.1a| | 1 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front mudguard can easily contact any fixed point of the motor bicycle. |2.3.7| | 1 |
| All position lamps not working (4.2.1 (a)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Suspension component pin or bush excessively worn knuckle (5.3.4 (a) (i)) | 1 |
| Rear Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear brake arm lock nut, split pin missing |6.2.1h| | 1 |
| Rear Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Brake component has an inadequate repair |3.1.5| | 1 |
| Central Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Central Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
| Front Front position lamp damaged and function impaired |1.1.1b| | 1 |
| Centre Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Front Handlebar handgrip missing |2.1.1c| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Nearside Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Wheel spoke excessively bent |4.2.1b| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Rear position lamp damaged and function impaired |1.1.1b| | 1 |
| Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
| Inner Front Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Outer Front Upper Handlebar deformed |2.1.1b| | 1 |
| Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Horn not working missing |7.7 |a| |ii|| | 1 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii|| | 1 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Rear Suspension component has excessive wear or free play |5.3.3 |d|| | 1 |
| Rear Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Rear Brake pivot excessively worn Brake pivot bolt loose |1.1.15 |b|| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Rear Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Front Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
| Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Stop lamp does not illuminate immediately a brake applies from front brake |1.3.1a| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Upper Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Rear Rear wheel bearings are excessively tight |2.4.A.2c| | 1 |
| Brake pedal cannot be applied smoothly fouling sump guard |3.1.3d| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Nearside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Front Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front position lamp deteriorated and function impaired very dim |1.1.1b| | 1 |
| Rear Drive chain sprocket excessively loose Excessive play in Cush Drive Rubbers (6.1.7 (c) (i)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Rear Wheel bearing has excessive play Hub/Sprocket Carrier, Excessive play in Bearings. (5.1.3 (a) (i)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Registration plate lamp issues | 1 |
| Front Horn sound not in accordance with requirements harsh note (7.7 (c)) | 1 |
| Rear Stop lamp adversely affected by the operation of another lamp brake lights not working of front and rear levers when side side lights on (4.3.3 (b)) | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Direction indicator missing |1.5.1a| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Fuel tank leaking cap |7.2.1a| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Centre Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Centre Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Front Handlebar deformed |2.1.1b| | 1 |
| Offside Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Rear Stop lamp not working Wires disconnected. (4.3.1 (a) (ii)) | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Front Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Clutch lever positioned so it cannot be readily operated. nut missing and pin is loose |6.2.1g| | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear mono-shock pivot excessively worn play in mono shock linkage? |2.4.B.4| | 1 |
| Front wheel spindle loose |2.3.3a| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Centre Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Front mudguard can easily contact any fixed point of the motor bicycle. |2.3.7| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |
| Nearside Indicator switch insecure |1.5.4| | 1 |
| Offside Rear Sidecar wheel alignment has excessive toe-out |5.3.1a| | 1 |
| Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Indicator tell tale not operating correctly |1.5.2| | 1 |
| Stop lamp does not illuminate immediately a brake applies rear switch |1.3.1a| | 1 |
| Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Front suspension has severe distortion of a load bearing member or its supporting structure. |2.3.8| | 1 |
| An item not tested |Manual| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Front Brake lever mounting cracked |3.1.2c| | 1 |
| Brake lever mounting insecure |3.1.2a| | 1 |
| Throttle operating incorrectly not returning |6.2.1f| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Wheel bearing has excessive play Front (5.1.3 (a) (i)) | 1 |
| Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
| Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear suspension bearing has excessive free play lower linkage |2.4.A2a|i|| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Brake component has restricted free movement and operation is likely to be impeded front brake plate lever hitting plate |3.2.A1h| | 1 |
| Rear suspension bearing has excessive free play swinging arm bearings |2.4.A2a|i|| | 1 |
| Rear suspension bearing has excessive free play rear suspension linkage |2.4.A2a|i|| | 1 |
| Front Brake cable has a significantly damaged outer casing. |3.2.A1b| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |